[Terry_Burrows]

  I was thinking of buying one of these mytee 450 psi twin inline heaters whats your thoughts please good machine or not thinking of spending £2000 ish thought of the 400 psi ninja steam  built in steam any one had one from woodbridge

[Andy Hogarth]

Excellent machine, mine rarely comes off the van.

Had nearly two years with no problem,, easily runs 3 lengths of hose.

Only problem really is the heaters aren't all that.

[Jon Oldham]

Would agree with Andy on the heaters but mine did last 2.5 years. Great machine, easy to lift in and out of van. Watch cooling fan on front of machine. If you miss the clean water tank and it runs down the front it can short the fan. I just have a towel stuffed into handle to catch any drips. Apart from heaters, everything else is good.

Regards

Jon

[Andy Hogarth]

Matt fit mine with a rubber 'flap' to stop it but I still do the towel in the handle thing lol

[Terry_Burrows]

guys has yours got twin in line heaters as I am told this is a new thing there doing and they produce constant hot true or not so 

[Andy Hogarth]

Mines 2 years old, the newer ones do indeed state 'real heat'

Basically the ones in mine are fantastic if the water is 'mildly warm' it really heats it up. if it's clap cold then it barely touches it

[Terry_Burrows]

I have been to see one today very impressed they asure me its constant very hot being 2 heaters you can turn one off if you wish,
it also has clip on bars so you can carry the hose on the side its very well made bit of kit,I may well be getting this monday,it also has heavy
duty cables,pump gauge all for £2145 with tools it does look the dogs

[Terry_Burrows]

  went today on a test drive on a mytee 450 psi twin heaters the vacs great! the heat failed after some looking at it by there
spanner men found heater lead off not the demo I was Looking for ???so going back to test drive again at £2145 not cheapo
some what confused some what off putting will report back let you all know

[Ken Wainwright]

Terry

I had the opportunity to "play" with a Speedster at a suppliers Open Day  a few years ago. I must say I was very impressed with the performance and it seemed to work well with the AW29 wand supplied with it at the time. From this short experience, the only thing I was wary of was the very small aperture for filling the tank. Easy to spill water.

Since then, I have spoken to quite a few people who were displeased with their Speedsters, or new someone who was. The problems I've heard of are from overspilt water affecting electrics and premature component failure, particularly non-Lamb vacs and heaters, along with support from their suppliers. I know of one distributor who, so the story goes, stopped selling them for this reason.

It's up to yourself to decide what to buy, but I must say that your experience today may be an indicator.

Safe and happy cleaning
The Ken

[Terry_Burrows]

yes Ken it is I keep lookng at the ninja 400psi steam built in and heater but this comes out at £3100 ish mytee come out at £2145
so confused as to what to get

[Simon@arenaclean]

what about the Power flite PFX 1350 perfect heat, a scorpion or an airflex with an inline heater or the Alltec. Plenty of other options.

[Terry_Burrows]

yes looking at those to

[Terry_Burrows]

  just to give you feedback on the new mytee 450psi twin in line heaters if you want vac power and crazy heat just buy one I was so
impressed I just had to have it knock out power all round  and its standered with a 50ft hose and pressure pipe go have a test drive super

[Terry_Burrows]

  Gutted after just one hours use the heat fails on my brand new mytee and wont get hot it says about heater rest buttons,surely you dont have to keep opening up machine every time,if so this is going back on monday morning first thing and its money bac time
cant believe it hows you luck!

[Terry_Burrows]

 ::)starting think ken was right :

[Fintan_Coll]

Sorry to hear of your bad luck Terry, but yes I would leave it back and get refunded. Plenty more machines to choose from.

[Terry_Burrows]

  used it today opened up the machine to find the in line heaters had both blew there safety buttons out I put them both back in
and got real hot again how often has this got o be done,I will be going back monday and I will ask for a full refund not Impressed the machine did this on the demo in  the shop

[Terry_Burrows]

  went back to woodbridge today and they gave me a full refund for my machine all in all you cant say fairer than that,
fair play to them on that note alone I would still deal with them if I had to, Thank you to all at Woodbridge

[Shaun_Ashmore]

Good post Terry everyones happy that way.

Shaun

[Ken Wainwright]

Well done Terry and well done Woodbridge.

Now you're back to the earlier problem Terry.  Which machine

Safe and happy cleaning
The Ken