[nat1]

Hi what is the best product to use to clean up enamel baths? My mother-in-law has 1 & it is getting a bit on the grubby side.


Many thanks


Natalie

[vacman]

If it is surface dirt then ordinary washing up liquid on a well-worn sponge scourer should clean it...trouble with enamel baths is that they stain 

[pro-clean]

http://www.tubbyuk.com/

[The Great One]

Hi

Bar keepers friend £3.00 comes as a powder, shake on, wet a scourer and rub in, leave for a minute and rinse, repeat if necessary.

Toilet limescale remover (the blue stuff) £1.60 wear gloves (it's an acid) squirt around bath, scourer in again, rinse immediatley, repeat if necessary.

Fill bath with hot water add 2-3 caps of Bio Logical Persil, leave for a few hours, drain and clean

Good luck

Regards

Martin

[nat1]

Cheers guys, will have a bash at your ideas!!




Nat

[Fox]

Sorry Martin I wouldn't use any of those methods on an enamel bath!

I had my bath re enameled about 3 years ago and the guy who did it said not to use anything - products or cloths - that is at all abrasive.  All I have ever used since is cif foam cleaner and a non scratch sponge scourer, this does a wonderful job and it hasn't stained at all.  Spray with the foam, leave for 15mins rub and rinse job done.

[The Great One]

Hi

That's ok foxy, each too their own!

I did one today actually, tenant had done a runner (not before taking a dump in the sink!)

Squirted toilet cleaner in, quick scour round with a metal scourer, also used it on the shower screen to eat the limescale, rinsed straight off, shined so bright I almost went and got my shades   :

Buffed up the bath with kitchen towel and the glass with glass cleaner and kitchen towel, came up a treat.

Also used it on the basin.

Regards

Martin