[richy27]

looking for a rotary machine preferably with few pads and scrub pad for hard floors

[s-barker]

I bought mine from ebay there are loads on there.

[Paul_Ashworth]

Hi Richard,
Shaun Ashmore had a cimex for sale which are the rolls royce of rotary machines think he wanted around £600.00 for it but they over 2k new

Hope this helps

Paul

[richy27]

thanks for the advice paul little out of my budget i am afraid

[*Derek*]

I was talking to a company who sells reconditioned ones for £200. They come with a 1 year guartenee. I can track down name if you want..

[clinton]

Be a good idea also to buy a dozen pads as well to do l m cleaning as well to go with your buffer.

Have you tryd j kelly he has a small package on his site..

[Griffus]

http://cgi.ebay.co.uk/EX-DEMO-MODEL-TRUVOX-ORBIS-400-GOOD-AS-NEW_W0QQitemZ190303368360QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item190303368360&_trksid=p3911.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A1318

I bought a Victor of this guy a few weeks ago and it works fine. Very good condition and really good value; P&P very reasonable too.

He is just a guy selling though and not offically in business. The item will not come PAT tested but for this money snatch his hand off.

Regards

Ian

[Paul_Ashworth]

Its Cheap but it is a burnisher high speed model at 400 rpm it will be too fast to use for agitation of pre spray or bonnet buffing which should be a 175 rpm (400 rpm is used for buffing of Viynl floors

Paul

[kevin sparrow]

Richard I have for sale a truvox orbis duo , it's similar to the 400 mentioned but with the addition of dual speed so you can use it at 200 rpm which is fine for carpets and scrubbing hard floors,then flick the switch and.. it will polish, burnish etc at 400 rpm .

This is unused and comes with a 17" nylon brush, it,s an ex-display model
brand new these cost £850+vat

Looking for £400

[Griffus]

Its Cheap but it is a burnisher high speed model at 400 rpm it will be too fast to use for agitation of pre spray or bonnet buffing which should be a 175 rpm (400 rpm is used for buffing of Viynl floors

Paul

Hi Paul, he is looking for one for hard floors.......

[collins ReVive Stoneworks]

kevin have you got a picture and could you email; me

with contact number

[s.mitch]

have a taski ergodisk 238 15inch with drive board and 1 set pads unused still in box . looking for 325