Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Mike Roper

  • Posts: 326
Microfibre pads for rotary
« on: October 10, 2008, 01:23:30 pm »
A nyone recommend a terry or microfibre pad to use to buff a wood floor up and get rid of residue and final traces of dirt following spray /buff clean with red pad?
I wasnt happy with the results just spray buffing so experimented with a terry towel under the pad and it buffed it up nicely.
Mike

John Kelly

  • Posts: 4461
Re: Microfibre pads for rotary
« Reply #1 on: October 10, 2008, 01:53:48 pm »
Try using a Blue or White floor pad. These are less aggresive and designed for polishing. Failing that Prochem do a microfibre pad or as you have found just use a couple of terry towels.

garyj

Re: Microfibre pads for rotary
« Reply #2 on: October 10, 2008, 02:00:33 pm »
What sort of wood floor Mike, has it been polished or Bournesealed?

One of the biggest problems when using spray and buff is making the solution too strong, the stuff I use dilutes down to about 50:1.

Joe H

Re: Microfibre pads for rotary
« Reply #3 on: October 10, 2008, 03:54:07 pm »
Hi Mike

17" microfibre bonnet

h ttp://www.worldofclean.co.uk/index.php?categoryID=113

Jim_77

Re: Microfibre pads for rotary
« Reply #4 on: October 10, 2008, 06:16:43 pm »
I thought the 3M tan coloured pads were the right ones for wood ???

Mike Roper

  • Posts: 326
Re: Microfibre pads for rotary
« Reply #5 on: October 10, 2008, 09:01:00 pm »
Thanks everyone for your suggestions.
This floor is in a new nightclub only been down less  than a year- oak block finished with Lecol 2 part PU finish.By the time I was asked to look at it they'd used a citra clean product which  had'nt done the finish any good and caused a residue problem.I gave it a good clean last friday and applied 2 coats of Bona freshen up to revive the finish. Although they now use microfibre mops and twin bucket system the hammer it gets over a weekend makes it a nightmare to clean. Its the sticky alchohol thats the problem.
Hence my experimenting.They mopped the floor after the weekend but when I went in today it was a mess.I will try a tan pad , but how much crud can these absorb. Might even try a microfibre cloth tucked round a pad to shine it up.
Dont really want to go down the wax polish maintainer route as it will hinder any top coat application without sanding back.
Thanks,
Mike