Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

JSMC

  • Posts: 3511
dI tanks arrived
« on: February 14, 2008, 09:18:24 pm »
i ordered 2 tanks off ebay and today they arrived. the y seem to be made or covere dina weave type material. also when you screw the top off it is a long section of tubing which goes down to the bottom of the tank . how does this all work
Logged

alanwilson

  • Posts: 1885
Re: dI tanks arrived
« Reply #1 on: February 14, 2008, 09:26:11 pm »
2/3 or 3/4 fill it with resin.  screw the top back on and connect inlet and out (direction of flow) and hey presto
Logged
I've never been to bed with an ugly bird but I've woken up with loads!

macmac

Re: dI tanks arrived
« Reply #2 on: February 14, 2008, 10:40:58 pm »
Yep, you've got the right things.
Do they have in or out marked on the top anywhere?

Tony
Logged

Paul Coleman

Re: dI tanks arrived
« Reply #3 on: February 14, 2008, 10:46:30 pm »
Quote from: JSMC on February 14, 2008, 09:18:24 pm
i ordered 2 tanks off ebay and today they arrived. the y seem to be made or covere dina weave type material. also when you screw the top off it is a long section of tubing which goes down to the bottom of the tank . how does this all work

The tube is called the "riser tube" and it fits into the hole on the underside of the lid.  When you fill up the resin vessel, make sure you don't get any resin in this tube.  I sometimes put a bit of sticky tape over it (make sure you remove it after putting your resin in the vessel).
Logged
Pages: [1]