[m.b.s.]

is there any thing i need to do to new resin before i put it in to a di cylinder ie wash it with pure water or any thing or can i put it in as it is and it will produce pure water cheers

[windowwashers]

is there any thing i need to do to new resin before i put it in to a di cylinder ie wash it with pure water or any thing or can i put it in as it is and it will produce pure water cheers

wash out the unit with pure before putting in the resin then fill with pure once you have put the resin in

[m.b.s.]

is there any thing i need to do to new resin before i put it in to a di cylinder ie wash it with pure water or any thing or can i put it in as it is and it will produce pure water cheers

wash out the unit with pure before putting in the resin then fill with pure once you have put the resin in

cheers m8 but i only have a 500ml di cylinder after my ro unit so i just wash it with pure and fill it with pure my reeding is 001 put i would like it to be 0 as i have decided once it goes above this it is time to change it what do you think

[windowwashers]

is there any thing i need to do to new resin before i put it in to a di cylinder ie wash it with pure water or any thing or can i put it in as it is and it will produce pure water cheers

wash out the unit with pure before putting in the resin then fill with pure once you have put the resin in

cheers m8 but i only have a 500ml di cylinder after my ro unit so i just wash it with pure and fill it with pure my reeding is 001 put i would like it to be 0 as i have decided once it goes above this it is time to change it what do you think

your reading should be 000 after di with new resin, the only thing i can think is that you di vessel is not clean, if you are getting 001 form your RO that is very very good, your resin will last quite a long time

[D.Salkeld_Ltd]

Hi m.b.s,

How long and aprox' how much water have you produced since the canister was new?

I have a 100gpd RO and a 750ml DI polisher.  The water from the RO is about 004 to 006 and I produce about 1700 to 2000ltr of pure water in 2 weeks when the pure goes up to 001.  I change the resin every 2 weeks.

I run my system from Wed to Sat which produces me a weeks supply.  After the first week I shake the DI canister before starting up the system again.

David

[m.b.s.]

be back soon 2 year old woke up

[m.b.s.]

is there any thing i need to do to new resin before i put it in to a di cylinder ie wash it with pure water or any thing or can i put it in as it is and it will produce pure water cheers

wash out the unit with pure before putting in the resin then fill with pure once you have put the resin in

cheers m8 but i only have a 500ml di cylinder after my ro unit so i just wash it with pure and fill it with pure my reeding is 001 put i would like it to be 0 as i have decided once it goes above this it is time to change it what do you think

your reading should be 000 after di with new resin, the only thing i can think is that you di vessel is not clean, if you are getting 001 form your RO that is very very good, your resin will last quite a long time

my  sorry about that my daughter has got to that stage were she throws a tantram when its time for bed wish i could get some contract work so i dont have to worry financialy for her any way my reading before ro is about 250 ish after ro defore di its about 006-007 after di its 000 but it raised to 001 now left it running whilst filling the van its back to 000 must have had a floor in it or something as i have taken a few readings now and back to 000

[m.b.s.]

Hi m.b.s,

How long and aprox' how much water have you produced since the canister was new?

I have a 100gpd RO and a 750ml DI polisher.  The water from the RO is about 004 to 006 and I produce about 1700 to 2000ltr of pure water in 2 weeks when the pure goes up to 001.  I change the resin every 2 weeks.

I run my system from Wed to Sat which produces me a weeks supply.  After the first week I shake the DI canister before starting up the system again.

David

i have been running it about 2 weeks now constantly
i have a 100 gpd ro and a 500 ml di it has produced about 1250 liters now my water to thr ro is aprox 250 ish after di 006-007 after di 000 but it rose to 001 but left it running whilst transfering the water to the van and its back to 000 must have had a floor in it or some thing as have taken a few readings now and its stopping at 000