This is an advertisement
Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Ivar_Haglund

  • Posts: 170
100 psi is it enough to clean with
« on: October 27, 2004, 01:12:15 am »
can machines with 100 psi or less have the same flushing ability as machines with say over 200 psi


IVAR 8) :P
Logged

Bryan H

  • Posts: 143
Re: 100 psi is it enough to clean with
« Reply #1 on: October 27, 2004, 10:16:53 am »
The short answer is No !
But I cleaned perfectly successfully for years with 100 psi,  and a lot less in the early days!

I now use 135 psi which is a definite improvement, but will certainly upgrade to a higher pressure when this pump gives up the ghost.

The jets of course should be balanced to pump pressure, so may need changing to suit.


Bryan
Logged
Christal Clean - Berks

Dynafoam

Re: 100 psi is it enough to clean with
« Reply #2 on: October 27, 2004, 07:31:13 pm »
Ivar,

A strange question to come from someone with  a Recoil3  ???
Logged

Ivar_Haglund

  • Posts: 170
Re: 100 psi is it enough to clean with
« Reply #3 on: October 28, 2004, 05:33:41 am »
My pump is varable pressure

I have not had it down to 100 psi for carpet cleaning.

I just run it flat out.


IVAR :P
Logged

Ed Valentine

  • Posts: 183
Re: 100 psi is it enough to clean with
« Reply #4 on: October 28, 2004, 04:17:25 pm »
Ivar;

The actual cleaning performance of 100 psi will depend more on the "flow" than anything else.

For example, anyone could acheive 100 psi; but what is coming out of the nozzle (pump capability) in terms of water flow?

 A 100 psi pump producing .03GPM is much different than  the same PSI rated pump producing .08 GPM. A big difference in cleaning speed and breaking down surface tension.  ;)

Those are my thoughts.

Good Fortune to our friends across the pond;
Ed Valentine
cross-american corp.
Logged
Pages: [1]