Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

clarkson

  • Posts: 1022
Dust control
« on: April 11, 2019, 04:24:43 pm »
Hi guys
I have been asked to vac the sawdust out of a cnc room .

I was going to use ladders with someone footing or a small
Tower but today’s review no one is happy with that .

No room for mewps like a pop up
So has to be from the ground .

Thought about using the gutter vac
But does anyone know if you can get 2inch brush heads from anywhere to fit the vac tubes ?

Cheers
John

Smudger

  • Posts: 13164
Re: Dust control
« Reply #1 on: April 11, 2019, 09:45:47 pm »
can't sat that I've seen any - however I did find a brush that fitted over 38mm and the outside diameter was a must fit inside a 2 inch tube - not ideal but does work

Darran
A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty.

www.oddbodscleaning.co.uk

Dazer

  • Posts: 5
Re: Dust control
« Reply #2 on: April 23, 2019, 09:33:38 pm »
can't sat that I've seen any - however I did find a brush that fitted over 38mm and the outside diameter was a must fit inside a 2 inch tube - not ideal but does work

Darran

Dazer

  • Posts: 5
Re: Dust control New
« Reply #3 on: April 23, 2019, 09:34:46 pm »
Mod note: if you wish to advertise please contact admin.