[mufcglen]

I'm making my own version of exceed style base fitting and I just need two rubbers to make something similar and was wondering can you or anyone tell me the exact size of the no1 pole internal and external, Ive only got a tape measure and would like the exact size so I can get rubbers that fit snug!!

[Clever Forum Name]

What's ya email addy buddy. I have something for you

[Clever Forum Name]

Emailed 

[mufcglen]

Cheers got it pal but I want to fit an almost fixed fitting so I don't have to hold the male side pipe as I fit female connection on, that's where a rubber/plastic bung style fitting like exceed's would fit perfect if I got the right size with a centre hole snug enough for the pole hose and the hose clamp would stop it pushing back into the no1 pole!

[Deangsi]

You need a set of vernier calipers really cheap, excuse spelling

[mufcglen]

Yeah I used to have a set from working in the motor trade but can't find them, was hoping Alex could tell me exact sizes saves me buying a set!

[mufcglen]

if Alex can confirm im correct or wrong but ive got about 20mm internal diameter and external 22mm of no1 section of slx pole!

[Clever Forum Name]

Just email him direct bud.

[mufcglen]

lol good thinking, i was hoping he'll just reply on here!

[Alex Gardiner]

lol good thinking, i was hoping he'll just reply on here!

Pop me an email and we can discuss the IDs 

[steven jonesg]

Just send your pole in to me, and I will convert your pole for you.
I have the kits to convert Gardiner poles. We have all the pole dimensions here.

[Deangsi]

I fear this design will put wear on the inside of the first section??

[mufcglen]

cheers for reply guys, ive sent you an email Alex, Steven thanks for the offer however i need the pole everyday and im just going to sauce some rubber sleeves myself to cover the rectus and internal pole.
Dean i dont think it will wear that much if any as your still pulling pole hose through like you would any pole?

[steven jonesg]

No it won't cause any wear in the sections this is a fact, not to worry about.
we are offering a service of fitting tubeless kits professionally.
to work effectively, it must have the sleeve ejector.
please email me on website under contacts.
Could get you converted ready for new year.

[steven jonesg]

If you want, I can send you the kit? As long as you feel competent to DIY.

[mufcglen]

Looks very easy pal that's why I was going to do it myself, I've always tinkered with things myself over the years think I've got it in my blood and probably why I was a mechanic for 10 years just a shame the money wasn't half as good as cleaning windows!!
How much are your kits or just to sell the fittings Steven as I figure it will only cost me a few quid if I find the right rubber or plastic sleeves as I've already got the rectus and pole hose etc
Looking at your kit it's just the sleeves I need to sauce similar?

[Alex Gardiner]

cheers for reply guys, ive sent you an email Alex, Steven thanks for the offer however i need the pole everyday and im just going to sauce some rubber sleeves myself to cover the rectus and internal pole.
Dean i dont think it will wear that much if any as your still pulling pole hose through like you would any pole?

Just replied - apologies for the delay - I just managed to blow the house electrics - all sorted now!

[mufcglen]

lo its that new extreme electrically charged weightless hoseless pole your designing

[Bungle]

cheers for reply guys, ive sent you an email Alex, Steven thanks for the offer however i need the pole everyday and im just going to sauce some rubber sleeves myself to cover the rectus and internal pole.
Dean i dont think it will wear that much if any as your still pulling pole hose through like you would any pole?

Just replied - apologies for the delay - I just managed to blow the house electrics - all sorted now!

You were putting the Xmas lights up weren't you Mr G