[Phil @ Extreme Clean]

as title anyone

[Phil @ Extreme Clean]

anyone ?

[Jamie Pearson]

Can you post a picture of the locking ring on your drive board?

Might be able to help here.

[Phil @ Extreme Clean]

Thanks Pal iv'e sent email with pic 

[tonner0]

If you are able to help with a Restore brush at a sensible price I may well be interested too.

[Phil @ Extreme Clean]

For CSUK cheers Phil.

[Kev Martin]

I think our new brush system will fit these!  Someone want to call me with a brush in their hand and give me the dimensions?  I will then make absolutely certain

Kev Martin
Tiling Logistics
Marblelife Ltd

0121 705 5333
07770 598855

[Phil @ Extreme Clean]

Hi Kevin

what dimensions do you need ? i only have my drive plate

Cheers Phil.

[Kev Martin]

For CSUK cheers Phil.

Phil

Measure the diameter of the hole in the middle, the diameter of the hole in the middle of the prongs and give me the size of the metal tabs.  Ring me if your unsure at Office 0121 705 5333 or Mobile 07770 598855 you can either text me or e mail me the measurements to tilinglogistics@hotmail.com

Kev Martin
Tiling Logistics
Marblelife Ltd

[Phil @ Extreme Clean]

Black lines Measure 2.5"
Red Lines 1.25"
Blue Lines 2"

And the hole on front of drive plate is 4.5"



Any good Kev it's quite hard to know what to measure with it being a funny shape lol.

[Kev Martin]

Black lines Measure 2.5"
Red Lines 1.25"
Blue Lines 2"

And the hole on front of drive plate is 4.5"



Any good Kev it's quite hard to know what to measure with it being a funny shape lol.

OK I have checked two of ours and the closest is same between black lines 2.5" same overall diameter 4.5" where you red lines are measures a little over an 1" and where your blue lines are measures around 21/4".  Can you just measure between 2 of the blue lines so I know the difference between the prongs/tabs

Kev Martin
Tiling Logistics
Marblelife Ltd

[Phil @ Extreme Clean]

Hi Kevin

2" between the blue lines mate

Cheers Phil.

[Phil @ Extreme Clean]

would it not be easier for you to post me the ring off the brush then i can try it Kev i'd send you mine but i need it lol.

[Kev Martin]

I will send you one tomorrow morning either e mail me your address or post it on here

Kev Martin
Tiling Logistics
Marblelife Ltd

[Phil @ Extreme Clean]

emailed you Kevin

Thanks Phil.

[Kev Martin]

Phil

Posted it to you today

Kev Martin
Tiling Logistics
Marblelife Ltd

[Phil @ Extreme Clean]

Hi Kevin Recieved mate will try later and let you know Thanks Phil.

[Phil @ Extreme Clean]

Hi Kevin Recieved mate will try later and let you know Thanks Phil.

Doesn't Fit mate the centre is just a bit too small to go over the ring on machine.

[Kev Martin]

I have ordered the Bosses for the Dry Fusion they will be in stock in the next few weeks

Kev Martin
Tiling Logistics
Marblelife Ltd

[Phil @ Extreme Clean]

nice 1 kev i'l keep hold of this disc till then pal if ok then send me a boss to try i'l return both or 1 lol

Cheers Kev.

or if you need back a.s.a.p let me know i'l return pal.