EMV201 All in One Machine - Hot Water Extraction
The Texatherm Cleaning System is a patented process combining a unique chemical technology with heat, agitation and reaction between two solutions. The process produces a capillary action which safely deep wet cleans carpets but also delivers all the benefits normally associated with dry cleaning systems.
Dry in only 30 minutes
Cleans, disinfects and applies anti-static coating
Safe for use on wool carpets
Guaranteed not to stretch, shrink or split seams
Low moisture and noise levels
Up to 60% reduction in cleaning time
Leaves no resoiling sticky residues
Environmentally friendly
pH neutral carpet on completion
Outstanding Hot Water Extraction cleaning with excellent recovery. The EMV achieves excellent performance through its unique patent pending variable pump flow control systems and air flow control.
The EMV's unique digital flow control system balances flow with pressure and eliminates the need for excessive pressures to compensate for lack of flow or lift when working at height or with extension hoses. Once you have set your desired pressure the EMV's pump control system will monitor and adjust the flow automatically, giving a constant pressure at the tool end even with several extension hoses fitted or at height.
No more running down stairs to operate the machine. Once you are set up, control all systems via your remote unit.
No more excessive back pressures leading to premature pump failure.
Total flow control giving better penetration and enhanced lift shortening cleaning times.
Enhanced lift creating better drying times, on average between 45mins to 1½ hours naturally.
Pressure can be adjusted by 5psi increments and down to as low as 40psi for fabric cleaning.
The EMV has been designed so that the Texatherm process system that utilises cleaning pads can be accommodated in the solution tank. This will allow the operation of two different methods of cleaning to be undertaken at the same time.
Dual pole thermal circuit breakers on mains inlets
High visibility cables
8Vdc control panel
Full control of all systems via remote control
Automatic standby mode
Solution level display on both clean and waste tanks
Solution tank, empty and low level automatic heat shut off sensor
Recovery tank full level, automatic vacuum shut off sensor
160psi pump with Texatherm patent pending full digital flow control
2x3 stage heavy duty high flow vacuums
Unit weight [empty] 46.7 Kg
Noise output levels, 1 x Vac = 73dB, 2 x Vacs = 76dB
Gate valves on both recovery and solution tanks
Exhaust vent interface hose
Dump hose connections on both solution and recovery tanks
Base access to working parts fitted with lockable catch
Directional locking transit brake
Reason for Sale - No longer required as I have closedmy business down. Less than 50 hours use in 2 years. Please contact me if you have any further questions.
All required hoses, lance etc in good working order and condition. All you need to start earning money tomorrow.
£1500 ono
Tel:07739 731007
Thanks
Gary
