[The Carpet Cleaning Pro]

Can't seem to do the maths... been a long day.
I have been reading about mixing Power Burst :

 For injection sprayer, mix 45ml (3 measure scoops) of S789 per litre of hot water in the sprayer container. My new injection sprayer mixes at 4,8,16,32 and 64:1, so how many scoops of powder and at what mixing ratio?

[absolutecleaning]

Im pretty sure thats based on 8-1 at 3 scoops / litre.

[The Carpet Cleaning Pro]

Thanks for your help. Just been on Prochem website and the injection sprayer they sell is a 1:9 so perhaps it is based on that?

[derek west]

3 scoops per litre for hydraforce, 1 scoop per litre for direct pre spray.

[richy27]

right easy peasy     if you have been mixing up to use in pump up sprayer   use 8 times as much pb   if th hydraforce is set to 8-1

[PaulKing]

Good stuff isn't it!

[JandS]

45ml per litre is 22.2 to 1.    1000 divided by 45.

John

[The Carpet Cleaning Pro]

Good stuff isn't it!

That would be 8 scoops pet litre. That can't be right

[The Carpet Cleaning Pro]

right easy peasy     if you have been mixing up to use in pump up sprayer   use 8 times as much pb   

2 ph is 100 times more than 1 ph so how can what you said be correct

[Jim_77]

First of all I'd ditch the variable dilution hydroforce because the mechanism is so primitive you haven't got a clue what ratio it's actually diluting at

I put 12 heaped scoops in a 4 litre container, which I think is about standard.

I have never been able to work out why they recommend different dilution rates for pressure spray/hydroforce

Recommended dilution works out at 3 scoops per litre in a hydroforce container.  That mix is then further diluted at 1:9, so it works out you have got 1 scoop in every 27 litres of solution that comes out.

So why does it need to be 27 times stronger from a pressure sprayer?

All I can say is that when I use it, it does the job

[ianharper]

Monty

I put three scoops paul moss style, always test when more than one colour. but what i have been doing is adding two oxibrite as well. you need to boil kettel to activate it and its been fantastic.

did a job yesterday with dog mess all over came out easy and carpet looked new. surprised myself. 

http://www.restormate.co.uk/epages/15094.sf/en_GB/?ObjectPath=/Shops/15094/Products/B151


Respect

Ian Harper

[JandS]

It tells you on the label   15ml/L  1-66

http://www.prochem.co.uk/safety%20data%20sheets/sdss789.pdf

John

[The Carpet Cleaning Pro]

Adding the oxybrite to power burst is amazing for presraying polyprop carpets. Been doing this for a while now with amazing results

[PaulKing]

so hows it done ?

[Adam Fearnley]

Yes, how much oxybrite do you mix with PB and what's the result, brighter carpets?

[The Carpet Cleaning Pro]

exactly as it says on the label "you put one scoop in per wash"