[richie]

3 Prochem Cub XL frames with some wiring & hoses (1 needs scrapping really)
3 vac blowers as fitted to the Prochem Cub XL
2 water pumps (1 may need rebuilding) 1 is from a Cub the other unknown
2 engine exhaust heat exchangers from a Prochem Cub XL
1 working 16hp B&S air cooled engine
3 partially stripped engines (could be used for spares)
1 waste tank for a Prochem Cub XL
1 fresh water tank for a  Prochem Cub XL

1 Hydramaster Crossfire 4.2 frame with some wiring and most hoses
1 waste tank for a Hydramaster Crossfire 4.2 / 4.4
1 Honda 20hp air cooled engine as fitted to the Hydramaster Crossfire 4.2
1 Roots 45 vac blower as fitted to Hydramaster Brossfire 4.2 / 4.4,  Spitfire 4.0,  early Maxx 450D
1 set of heat exchangers (5) as fitted to Hydramaster Crossfire 4.2.


WILL SELL AS A JOB LOT OR SEPERATELY.

If interested either leave a message on here or call on 07984 052 669

Richie.

[MAX Carpets]

Hi Richie

How much for the 16hp BS engine. Also, would any of the blowers/water pumps for Prochem Blazer plus?

Regards


Justin

[nevil]

I think the blazer plus had a smaller blower than the roots 45s that Richie has.
I have a sutorbilt 3006, Same spec as a roots 36 if you need it. I would check with Prochem before splashing the cash though. 07905188459

In fact the one I have will fit. Acording to this
http://www.oberread.com/gdconversions.htm

[Andrew Briscoe]

Hi Richie, what is the price of the B& S engine, i may need one, just awaiting a compression
test on mine. If price is right, i am in Solihull thurs/fri this week and could collect.

Andrew

[richie]

I have 3 vac blowers available that are as fitted to the Prochem Cub XL, the Blazer is just a updated version of the Cub XL so i would say yes the vac blowers i have will fit.  Yes there is also a Roots 45 available. Water pumps should fit but the plate they sit on may need modification. 

Give me a call regarding prices 07984 052 669

Richie.

[nevil]

Opps. Sorry Richie.

[richie]

no problem Nevil.....

[MAX Carpets]

Ok, so how much for a blower & the B&S 16hp engine?

Justin
07592898298

[richie]

updated prices given to people on the phone....

B&S 16hp engine £250
Vac blower to fit Prochem cub xl & other TMs with same £100

Richie

[richie]

B&S 16hp engine now sold

[richie]

Due to popular demand and god knows how many people asking.........TRUCKMOUNT FITTING SERVICE AVAILABLE    Call me for details 

Richie.

[Andrew Briscoe]

B&S 16hp engine now sold

Hi Richie, nice to meet you Fri night, engine will be great for a spare/backup.
Hope your daughter got to her party on time.
Regarding the heat exchanger, mine is 8" in diameter and 12" high,
it dosnt have any fixings just bolts to flexi exhaust hose top and bottom,
with a feed in and feed out, anything within an inch or two similar size would be ok.

contact me on 07850805251  or email andrewbriscoe@fsmail.net

Taken machine out this weekend, going to give it a few new hoses, connectors etc
and tidy it up generally.
hope to hear from you soon,

regards,

Andrew.

[richie]

Hi Andrew, was good to meet at last.  Yes Lauren got to the party on time, i got a neighbour to take her as i needed to be in Redditch by 7pm, got back from there in time to pick Lauren up.  I even managed to get out on the pi$$ after dropping Lauren to her aunts.   

Will let you know regarding the heat exchanger sizes.

Richie.