1
Window Cleaning Forum / Re: Shocking
« Last post by Spruce on Today at 09:35:37 am »Hi Simon W
OK thanks
Bryan
Here are a couple taken from Google Earth where we work.
Recent Posts
Here are a couple taken from Google Earth where we work.
2
Window Cleaning Forum / Re: Shocking
« Last post by Bryan Dolby on Today at 08:43:58 am »Hi Simon W
OK thanks
Bryan
OK thanks
Bryan
3
Window Cleaning Forum / Re: Electric vans
« Last post by Soupy on Today at 08:24:13 am »$2700 for a charging lead?
4
Window Cleaning Forum / Re: Electric vans
« Last post by michael mckeary on Today at 08:11:13 am »The latest problem is how much copper is in the charging leads. They are going round early morning and pinching them and selling them or getting £60 of copper out of them. They even chop them like what happened at Porsche & Merc garages and caused £80k worth of damage. Guy in USA woke up and had to buy a new one because it took the young guy 13 seconds to steal it. $2700 it cost him for a new one. I think hybrid is the real winner out of the RV revolution.
5
Window Cleaning Forum / Re: Help With Greenhouse Roof
« Last post by Small but perfectley formed on Today at 06:36:07 am »Hypo scrub rinse then Hypo again scrub rinse .
Try thick bleach boosted with hypo this may cling to glass for longer contact
Try thick bleach boosted with hypo this may cling to glass for longer contact
6
Window Cleaning Forum / Re: scaffold tower
« Last post by Amber51 on Today at 05:09:49 am »Buying a scaffold tower could save you money since you're doing a lot of roof cleaning, especially on bungalows in Norfolk. Consider looking for used ones on eBay to keep costs low.
https://www.ebay.co.uk/b/bn_7116015748
https://www.ebay.co.uk/b/bn_7116015748
7
General Cleaning Forum / Re: Softwash ditution_ spraying direct from container- youtube vids?
« Last post by Smudger on Today at 12:14:34 am »Here's one
You always get more info off USA sites - so you get 20% chemical - if my maths are correct you would use 2.1 litres of Hypo a min
which would give you 1.4% strength
Max Pressure: 5500 PSI
Max Temperature: 190°F
Up to a 10% injection draw rate
Made in the USA
Orifice: 2.2 mm
Flow Rate: 3.0 to 5.0 GPM
Inlet: 3/8" NPT-M
Outlet: 3/8" NPT-M
Hose barb: 1/4"
Materials: Stainless Steel
Weight: 0.25 lbs.
Or this - you can buy them to mix from 1% to 5%
already has a qr to fit on the lance and another qr for the nozzle
Stainless Injector with couplings (Blue, Red or Clear pipe)
High quality stainless steel foam injector including stainless steel quick couplings. Dosage orrifice plate at required % with pick up tube and strainer.
(Different orrifice percentages at 1% to 5%)
You always get more info off USA sites - so you get 20% chemical - if my maths are correct you would use 2.1 litres of Hypo a min
which would give you 1.4% strength
Max Pressure: 5500 PSI
Max Temperature: 190°F
Up to a 10% injection draw rate
Made in the USA
Orifice: 2.2 mm
Flow Rate: 3.0 to 5.0 GPM
Inlet: 3/8" NPT-M
Outlet: 3/8" NPT-M
Hose barb: 1/4"
Materials: Stainless Steel
Weight: 0.25 lbs.
Or this - you can buy them to mix from 1% to 5%
already has a qr to fit on the lance and another qr for the nozzle
Stainless Injector with couplings (Blue, Red or Clear pipe)
High quality stainless steel foam injector including stainless steel quick couplings. Dosage orrifice plate at required % with pick up tube and strainer.
(Different orrifice percentages at 1% to 5%)
8
General Cleaning Forum / Re: Softwash ditution_ spraying direct from container- youtube vids?
« Last post by Smudger on Yesterday at 11:57:32 pm »No you put the feed tube directly into a barrel - it will draw at the prescribed rate mixing just before the nozzle
9
General Cleaning Forum / Re: £4k to get into pressure washing. what would you get?
« Last post by Smudger on Yesterday at 11:55:58 pm »OP - your not really listening - as Stoots said your itching to blow 4k regardless
Splash has already said 21 lpm is enough and he does a fair bit of work - I've never needed more than this either maybe if you get a contract on the rigs or something....
You can get a great set up for around 2k - and thats if you really want to have a fsc as well - I only use them on tarmac and concrete
which is about 5% of work that comes in.
You could spend that 4k and the machine sit there week in and week out - that monies gone where as 2k leaves you 2k for leaflets - advert - web page should you need it
Splash has already said 21 lpm is enough and he does a fair bit of work - I've never needed more than this either maybe if you get a contract on the rigs or something....
You can get a great set up for around 2k - and thats if you really want to have a fsc as well - I only use them on tarmac and concrete
which is about 5% of work that comes in.
You could spend that 4k and the machine sit there week in and week out - that monies gone where as 2k leaves you 2k for leaflets - advert - web page should you need it
10
Window Cleaning Forum / Re: Talk to me about franchising please
« Last post by Smudger on Yesterday at 11:45:13 pm »Stoots - I think your just missing the point
Its not collect the dosh and walk away type of thing
Its not collect the dosh and walk away type of thing