[Gordon_Taylor]

Hi all,

As the title says, is it possible to turn the pressure down on a shurflo pump, I'm sure I see something on here once but can't any info, I sue the pump with a controller but could do with turning the pressure down.

Many thanks,

Gordon

[richard jagger]

i AM SURE A FLOW CONTROLLER WILL TURN THE PRESSER DOWN AS IT SLOWS THE PUMP DOWN.

[Gordon_Taylor]

Hi Richard,

Yes the controller does slow the pump down when switching off, it's more burst of water when I turn the tap on, and also to take the pressure all the connection that I use.

Gordon

[Roy Harding]

If it is a Varistream flow controler you can set the cut off presure.

But depends on the type you have to how you do it.

Roy

[Gordon_Taylor]

Hi Roy yes it's a varistream with the dial, how would i go about turn ing the pressure down,

Many thanks

Gordon

[Roy Harding]

With this type you have to open the front cover by undoing the 4 screws. Then you will see a blue dial, with A B C etc on, turn this back toward the letter A one letter at a time, and try each letter is a lower cut off setting.

Roy

[Gordon_Taylor]

Thanks Roy,

I'll have go a bit later and let you know how I get on.

Cheers

Gordon

[Gordon_Taylor]

Hi Roy,

Many thanks for the advice, It seems to have done the trick.

Many thanks,

Gordon

[Roy Harding]

Hi Roy,

Many thanks for the advice, It seems to have done the trick.

Many thanks,

Gordon

Glad to of help

Roy