[noizeo]

im just started out using wfp,i brought a di tank and have half filled with resin but the reading cuming in at 20?

can anyone give me any advise?
should i buy a ro unit aswell!!

many thanks

[richywilts]

have u checked to see what the tds is of the water comin from your tap

[Martin ccs]

what resin? from where? - not that it means it shouldnt work tho.
what size vessell?
have you def plug it into the right ends? - water in & water out, sounds like u havent.

[Peter Fogwill]

im just started out using wfp,i brought a di tank and have half filled with resin but the reading cuming in at 20?

can anyone give me any advise?
should i buy a ro unit aswell!!

many thanks

Why have you only half filled it?  Fill it up and see what the reading is.

Peter

[noizeo]

only have filled coz brought a small bag..

MIXED BED DI RESIN from pure-freedom on ebay?

11.4 l vessel..defo got the pipes done right way,lol

the tds reads 220 from tap..

DO YOU THINK COZ THE TANK AINT FULL NOT GIVING 000 READING???

i live in the isle of wight

thanks guys,any more info would be great

[daz1977]

right  are u just using a di vessel and no ro with a tap reading of 220,  if so u need a ro, or u will through resin like mad

[noizeo]

the 220 reading is from the tap

20 is the reading im getting when using vessel

[noizeo]

i did turn the tap to slowest possabile but reading still 3???

so if i brought ro unit do i still use a di vessel?

[daz1977]

yes,  with a reading of 220 u will need a ro and a di in the van to give it a final polish

[mci services]

the di will bring it to 000ppm on its own. it just wont last very long. fill it up and you will see.

but in the long run you would be cheaper with ro

[noizeo]

so the problem is coz NOT filled to top???

[daz1977]

if you fill it up, it will still go through lots of resin,  the tds is to high for just a di only

[noizeo]

ok guys
thank you for help

[mci services]

so the problem is coz NOT filled to top???

depends but how much water have you put through it before it went up to 20?

it should have still gave you 000 for a short while. it could be the riser tube is not sealed properly

[mci services]

by the way i agree you need ro as well but even at 220ppm you should still get 1000litres of water at 000ppm in a 11l di vessel

[mikeyfaerosyth]

had same prob.thought i put enough resin in (almost full)reading was 12.  2 or 3 more kilos came out at 000.