Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Nathanael Jones

  • Posts: 5596
Pressure washer pump question
« on: March 16, 2010, 01:54:41 pm »
I've a 13hp cold honda washer that uses a Comet ZWD4040 pump currently mounted on a trailer with a tank.

I want to get rid of the trailer (too much hassle hooking it up, manoeuvring/parking etc) and put the pressure washer back on its original trolley. The only thing that worries me is if the Comet pump will be able to draw water from a barrel???? Does anyone know?

I've searched the internet, but it seems the pump is mostly used in america where they have enough water pressure in an outside tap to hook a garden hose to the machine without using a barrel!

Also,.. anyone know where in the UK or Ireland I could get a seal kit for this pump?

derek west

Re: Pressure washer pump question
« Reply #1 on: March 16, 2010, 02:03:22 pm »
have you got a buyer for the trailer, i could be interested if its the right spec and price.

Nathanael Jones

  • Posts: 5596
Re: Pressure washer pump question
« Reply #2 on: March 16, 2010, 02:09:44 pm »
The trailer is up for sale,.. but I'm in Ireland, so prob a bit too far for you!?

p1w1

  • Posts: 3873
Re: Pressure washer pump question
« Reply #3 on: March 16, 2010, 05:02:05 pm »
Think i have the exact same washer as you nat that i just brought, the guy i got it off used to use a large wheely bin with an outlet out the bottom with i think 1 1/4 transfer hose connecting to the washer with no problems..i hope so anyway as thats the way i want to use it..i can e-mail a picture of what i mean if you want and what fiitings are used as it is not set up to use normal garden hose pipe..plus i will be trying it out on a little job at the weekend where the bin and washer will be at the same level so the pump will have to suck the water in.

paul

Nathanael Jones

  • Posts: 5596
Re: Pressure washer pump question
« Reply #4 on: March 16, 2010, 05:25:33 pm »
Thats a good idea Paul, thanks!
If it will suck from a barrel though it'd save me some work!

p1w1

  • Posts: 3873
Re: Pressure washer pump question
« Reply #5 on: March 16, 2010, 05:30:42 pm »
i'll let you know if it was ok as i have the same pump..

paul

BDCS

  • Posts: 4777
Re: Pressure washer pump question
« Reply #6 on: March 16, 2010, 06:51:48 pm »
Exchange engineering sell comet pump seals - 01476 578505

Nathanael Jones

  • Posts: 5596
Re: Pressure washer pump question
« Reply #7 on: March 16, 2010, 08:43:12 pm »
Cheers BDCS.

I finally got a reply from comet pumps. Gravity feed is ok, but sucking from a barrel will do damage. :(

BDCS

  • Posts: 4777
Re: Pressure washer pump question
« Reply #8 on: March 16, 2010, 10:24:26 pm »
Sucking the water will cause wear to any piston pump (cavitation) and a positive suction will always prolong pump life

Nathanael Jones

  • Posts: 5596
Re: Pressure washer pump question
« Reply #9 on: March 17, 2010, 08:13:15 am »
A lot of guys selling Interpump based washers specifically put "Can suck from a standing source" as a selling point though?

BDCS

  • Posts: 4777
Re: Pressure washer pump question
« Reply #10 on: March 17, 2010, 08:23:53 am »
I can run but I can't do it for long ::)