[wizard]

I have lost so many snap fitting due to them not wanting so grip the male fitting end Which then ends up in the bin as the suppliers will always blame you and charge you. This is a very expensive to solve this problem.
The solution is to file the top, side of the top flange round so it goes into the female part better. Do not round over the top only the tops ides as the top edge is what keeps it air tite but the squire sides and top cannot grip if the fitting have had a knock on the head of the flange were the water comes through/ By pounding the top sides the fitting even connects easer. Hope this all makes sence. Good luck

[wizard]

This is a problem we all have come on read it.

[ftp]

  not a problem i've ever had to be honest. Can't understand the cure either - you'll have to simplify it for me I'm afraid.

[wizard]

Thanks FTP I will put up a drawing soon. I have read about many on the forum have a problem with snap fitting not working properly.

[jouk45]

i changed over to medical connectors near 2 years ago, still have the same ones in use today,

[ftp]

  got a pic joe?

[Frankybadboy]

i changed over to medical connectors near 2 years ago, still have the same ones in use today,

jouk can you shed some light on these,unsure what you mean.please.

[stephen s]

what do you mean ??

[escadoo]

hi lads ..don't post often cause still in the taking in information mode and han'nt really acquired enough yet to start givin it out but had to reply to this cause these ez connectors have really been givin me jip since i started 2 years ago.far to costly for the length of time they last...rusting,sticking,water shootin everywhere when connecting or disconnecting....changed today to air connectors that i heard of on this forum and finished the day with dry legs and feet for possibly the first time since i began..result ...would like to know more about the medical connectors jouk as the air ones are a tad on the heavy side to connect to my trigger..

[jouk45]

wait 10mins will put a vid up that i made then how they look

[dai]

These look interesting.
http://www.colder.com/Portals/0/images/mr_coupling1.gif

[wizard]

 I have a drawing but cannot get it on here if the fitting was your nob then file the sides head round still keeping the hole flat. File only the side that are square if looking from the sides. So cannot explain better.
       

[wizard]

Hoe does one down lode Photos. this is driving me mad.

[mci services]

 I have a drawing but cannot get it on here if the fitting was your nob then file the sides head round still keeping the hole flat. File only the side that are square if looking from the sides. So cannot explain better.
       

that sounds really painful

[jouk45]

this is the ones i use, this is my daughter showing how easy they are to use, they are ultra light, but praticaly unbreakable, i have stood on them hundreds of times, and still here yet, mines are straight flow through, but you can buy them with valves to stop the flow when you disconect them, heres the video

[dai]

Where from Jouk?

[Bobs Window Cleaning]

I know exactually what you mean Wizard. I will have a go next time mine start leaking.

I cant understand how people posting on here does get what your on about

[weetot]

this is the ones i use, this is my daughter showing how easy they are to use, they are ultra light, but praticaly unbreakable, i have stood on them hundreds of times, and still here yet, mines are straight flow through, but you can buy them with valves to stop the flow when you disconect them, heres the video

Jouk, can you upload a clearer picture mate, that looks like your giving an enema to a skinned rat.

[stevieg]

These fittings do look interesting,i did ask jouk on another forum where he got these fittings!lets hope we get more luck this time.

[jouk45]

this is the ones i use, this is my daughter showing how easy they are to use, they are ultra light, but praticaly unbreakable, i have stood on them hundreds of times, and still here yet, mines are straight flow through, but you can buy them with valves to stop the flow when you disconect them, heres the video

Jouk, can you upload a clearer picture mate, that looks like your giving an enema to a skinned rat.

thats photobuckets pic lol click on the pic it takes you to the video i made showing how they look