This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1] 2  All

Andy1982

  • Posts: 37
Ro or Di
« on: February 24, 2010, 05:13:34 pm »
whats the best to get for a van setup? the ro or di van system?

Andy
Logged

wizard

Re: Ro or Di
« Reply #1 on: February 24, 2010, 05:44:43 pm »
IT not Di or RO. ITs (1) Di,    or  (2) DI and RO and that depends on water TBS.
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #2 on: February 24, 2010, 05:49:30 pm »
My water is around 180 tds before purifying....

so Ro is fine for me ,brings it straight down to 00 ... never used resin.
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #3 on: February 24, 2010, 06:13:56 pm »
A ro will bring that straight down to 00 ,..i have a 10" resin container which would attach on... but never , ever used it.
Logged

daz1977

Re: Ro or Di
« Reply #4 on: February 24, 2010, 06:18:14 pm »
i think my water is about 75 tds and i use a di only, never had any problems
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #5 on: February 24, 2010, 06:25:33 pm »
The cheapest way if you have good water as you do.... is a ro,very little to spend once its bought... pure freedom 300gpd around £150...


Its up to you but resin is expensive.

my mate spends £100 per month on resin.
Logged

daz1977

Re: Ro or Di
« Reply #6 on: February 24, 2010, 06:29:00 pm »
fresh resin, not that offen, what i do is put the old resin in a di vessel as use thsi to fill up my tank with and this cuts down my tds of the water in the tank, can get away with using this resin till the tds gets high,  but i live in cornwall and have know my water to be 35 as well, its only gone high over winter
Logged

davids3511

  • Posts: 2506
Re: Ro or Di
« Reply #7 on: February 24, 2010, 06:40:31 pm »
Are you on a water meter? That is an important consideration too.
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #8 on: February 24, 2010, 06:44:12 pm »
Quote from: andyhendo on February 24, 2010, 06:31:51 pm
im going to buy a system that i fit myself so saves me a few quid. so basically i need  an ro system? does having a ro system slow the flow down to the brushes?

a ro, and a system to wash windows are two seperate operations.
Logged

davids3511

  • Posts: 2506
Re: Ro or Di
« Reply #9 on: February 24, 2010, 06:47:39 pm »
In the long run it would be cheaper to get an ro then. At 80 you are probably at the limit on going DI only. The Ro will get the TDS down to 0.

The other thing to consider is that DI is on demand. When you turn the pump on out comes pure water so you fill your van up from a tap and off you go.

With an RO you need some sort of storage solution as the water is made slowly over a period of time. Most go for an IBC tank and fill up with pure water once a day. This means you cannot fill up anywhere other than at home and you need to have the space for an IBC.
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #10 on: February 24, 2010, 06:53:00 pm »
nope.... a ro system produces pure water with a pipe that you pop in the lid of the tank....and take it out when its full.... end of ro job...

the tank is then full and you need a pump to send your water out of the tank, into your reel, and up your pole...

the ro can be in the garage, in the van etc....its only used to make pure water, and you choose wether you put it into your van tank.... or a tank outside
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #11 on: February 24, 2010, 06:57:36 pm »
.


Andy,

i have my ro in the van... i attach it to my garden hose, one thin hose from the ro,(blue). goes into the tank , thats pure... the other thin hose (green)..is the waste.

in the morning my tank is full and off i go...650 litres.
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #12 on: February 24, 2010, 07:01:21 pm »
you can pick up a 640 ibc in a cage for around 40 or 50 quid...hose to pump...from pump to reel.... then up the pole...

its easy to set it all up yourself.
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #13 on: February 24, 2010, 07:04:38 pm »
buy one in a cage,  get a mate to bolt it down
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #14 on: February 24, 2010, 07:06:40 pm »
i mean a mate who can do it professionallyl lol....mechanic, etc
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #15 on: February 24, 2010, 07:20:41 pm »
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #16 on: February 24, 2010, 07:22:55 pm »
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #17 on: February 24, 2010, 07:33:11 pm »
i took out the ply on the floor and used anti - slip waterproof floor paint... then sealed any edges with a top shower sealant..

then i took two bungs out (rubber).... in the corners of the van.... so any leaks can escape the van.
Logged

daz1977

Re: Ro or Di
« Reply #18 on: February 24, 2010, 07:36:50 pm »
if you dont have space at home,  why not get two di vessel  this will help the resin last longer, as you only have to swap one when it reaches 10 and all you do is replace the resin with the high tds and swap the places on the di
Logged

geefree

  • Posts: 6180
Re: Ro or Di
« Reply #19 on: February 24, 2010, 07:45:00 pm »
Daz is right, if you have probs

but you dont need any resin , if your water at 80 tds... a ro will do it every time
Logged
Pages: [1] 2  All