[Mike Halliday]

Paul if you look close I don't think you can use jubilee clips to hold it in place, I think the hose cuffs are fitted inside the ports.

that's why the have used gaffer tape to make it airtight. Jim if I'm right you need to find the correct diameter radiator hose to fit externally over the ports, the way they have done it restricts the airflow.

[paul moss]

Mike your right.

I did not look at both ends of the hose.

It actually looks like 1 and half inch , Jim, if so can just change it to 2 inch.

If not go with Mikes idea.

[Shaun_Ashmore]

Wondered who's Blueline it was going to be as it was placed in the showroom bit of alltec, fantastic bit of kit you may look at yor bank statement but you'll never look back at the work you will do.

Shaun

[Dave_Lee]

I had a look at that TM when I was last at Alltec a few weeks ago. The grey hose is 2" all that needs to be altered is to put a 2" straight cuff on each end instead of those slightly reducing cuffs.
Dave.

[Martin S]

Lovely bit of kit Jim, good luck with it.