Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Andy Foster

  • Posts: 938
Shurflo and varistream problem
« on: September 10, 2009, 06:45:18 pm »
Hi

I have a surflo pump fitted to a varistream and the varistream keeps showing the light as red and stopping the pump.
I assumed this was because there was air in the system but doesn't seem to make a lot of difference even if I manually prime the pump.

Does it matter what way up you have the shurflo pump (mine has the in and out at the bottom at the moment).

Any help would be gratefully received.

Andy

Spruce

  • Posts: 8646
Re: Shurflo and varistream problem
« Reply #1 on: September 10, 2009, 08:04:02 pm »
Battery is flat
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

geefree

  • Posts: 6180
Re: Shurflo and varistream problem
« Reply #2 on: September 10, 2009, 08:13:46 pm »
yup !

Andy Foster

  • Posts: 938
Re: Shurflo and varistream problem
« Reply #3 on: September 13, 2009, 02:51:00 pm »
OK then... new battery (heavy duty) fitted and still the same problem... any ideas.

Does anyone know if it matters which way up the surflo pump is fitted?

Cheers

Andy

♠Winp®oClean♠

  • Posts: 4085
Re: Shurflo and varistream problem
« Reply #4 on: September 13, 2009, 02:55:49 pm »
The cut-off (numbers in flashing menu) may be set too low, thus not allowing the pump to cycle. Even if you've not altered the setting manualy, still check it.

Andy Foster

  • Posts: 938
Re: Shurflo and varistream problem
« Reply #5 on: September 13, 2009, 02:59:00 pm »
Thank you for that.

It has no numbers (not digital one I guess?), just a dial that turns clockwise up to 'boost', but I can never get anywhere near that.
I have to turn it down until it starts, then gradually build up the speed  but it normally cuts out (red light comes on) before I have enough flow to thoroughly clean.

 :(

♠Winp®oClean♠

  • Posts: 4085
Re: Shurflo and varistream problem
« Reply #6 on: September 13, 2009, 03:01:34 pm »
Thank you for that.

It has no numbers (not digital one I guess?), just a dial that turns clockwise up to 'boost', but I can never get anywhere near that.
I have to turn it down until it starts, then gradually build up the speed  but it normally cuts out (red light comes on) before I have enough flow to thoroughly clean.

 :(


Even the older version has a cut-off setting does it not? Never used the older one but isn't it a blue inner dial or something?

lee09

Re: Shurflo and varistream problem
« Reply #7 on: September 13, 2009, 03:01:58 pm »
Andy,
 is there a kink anywhere along the hose line? check all on the reel as well
Lee

♠Winp®oClean♠

  • Posts: 4085
Re: Shurflo and varistream problem
« Reply #8 on: September 13, 2009, 03:03:32 pm »
Also- my pump is the same way as yours- connectors at bottom. I've always had them this way with no probs in over 5 years.

Andy Foster

  • Posts: 938
Re: Shurflo and varistream problem
« Reply #9 on: September 13, 2009, 03:14:03 pm »
Thank you for that.

It has no numbers (not digital one I guess?), just a dial that turns clockwise up to 'boost', but I can never get anywhere near that.
I have to turn it down until it starts, then gradually build up the speed  but it normally cuts out (red light comes on) before I have enough flow to thoroughly clean.

 :(


Even the older version has a cut-off setting does it not? Never used the older one but isn't it a blue inner dial or something?

Just a black dial, no numbers at all!

Good news about the mounting of the pump, thank you.

Also, no kinks in the pipe... that was the first thing I checked and was hoping that would be the problem.

Sometimes I can build up the flow and it just keeps going no problem but mostly it wll only go so high then it cuts out and I have a hell of a job getting it up to the level I need again.

Sorry to bombard you with questions, I really do appreciate the suggestions.

Andy

lee09

Re: Shurflo and varistream problem
« Reply #10 on: September 13, 2009, 03:18:21 pm »
Could be the pump, how long has it been doing this and how old is the pump
Where in the midlands r u as I have a spare pump if your up poos creek
Lee

Andy Foster

  • Posts: 938
Re: Shurflo and varistream problem
« Reply #11 on: September 13, 2009, 03:23:02 pm »
Hi

I am in Stafford, the pump is about 5 years old and has been doing it for about 12 months now but is gradually getting worse.

How much do you want for your spare pump?

Andy

lee09

Re: Shurflo and varistream problem
« Reply #12 on: September 13, 2009, 03:26:18 pm »
I would loan it to you.
It was taken out  when I changed the van but then I did a deal on all new kit for the van, thus it has become a spare.
I will email you
Lee

concept

Re: Shurflo and varistream problem
« Reply #13 on: September 13, 2009, 03:29:11 pm »
Thank you for that.

It has no numbers (not digital one I guess?), just a dial that turns clockwise up to 'boost', but I can never get anywhere near that.
I have to turn it down until it starts, then gradually build up the speed  but it normally cuts out (red light comes on) before I have enough flow to thoroughly clean.

 :(


andy, i have exact;y the same problem! mine will only ever sit around 4/10 comfortably, which is fine for me, however, i occasionally want a boost, but cant get it!!

very frustrating.

lee09

Re: Shurflo and varistream problem
« Reply #14 on: September 13, 2009, 03:29:55 pm »
Andy
are you ok to put your mobile no up

Andy Foster

  • Posts: 938
Re: Shurflo and varistream problem
« Reply #15 on: September 13, 2009, 03:59:11 pm »
My number is 07957 982525.

Thanks

Andy

darragh windows

  • Posts: 481
Re: Shurflo and varistream problem
« Reply #16 on: September 13, 2009, 04:17:47 pm »
My number is 07957 982525.

Thanks

Andy




the older one does have a blue dial it is located behind the front cover just loosen the four screws and you will find it hope this helps
jamie

Andy Foster

  • Posts: 938
Re: Shurflo and varistream problem
« Reply #17 on: September 13, 2009, 04:21:06 pm »

the older one does have a blue dial it is located behind the front cover just loosen the four screws and you will find it hope this helps

Thank you for that... I'll take a look.

Fingers crossed that this fixes it.

Andy

Andy Foster

  • Posts: 938
Re: Shurflo and varistream problem
« Reply #18 on: September 14, 2009, 06:29:52 pm »
I would like to thank everyone for their help and especially Tony for lending me his spare shurflo pump to test my system.

The pump reacted exactly the same and so I could rule out my pump as the problem.

It transpires that the blue dial inside the varistream was the culprit... I have turned it up and it seems to have solved the problem. (Nice one Jamie)

Tony, I will drop the pump at the garage as promised.  Thank you so very much

Andy

lee09

Re: Shurflo and varistream problem
« Reply #19 on: September 15, 2009, 04:59:44 pm »
your welcome mate, sorry you had to make the journey.
Still all sorted now