Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

C.C.S.

  • Posts: 954
alex black pole hose
« on: July 28, 2009, 06:43:06 pm »
did anyone noticed a difference in diameter for the 8mm black pole hose that Alex is selling ?i ordered one recently and it's rather thinner than the old one which makes a big difference .i mean i can't fit the flow control anymore as it's thinner and comes lose.or maybe they put the 6mm tubing instead of the 8mm but checked the packing and on that foil that was wrapped it's says MH5/8BLK30M.anyway i might just give them a call in the morning.i was just wondering if anyone noticed any difference.thanks
Logged

ftp

  • Posts: 4694
Re: alex black pole hose
« Reply #1 on: July 28, 2009, 06:47:08 pm »
Fits the push fit valves ok haven't tried it on the gas tap valves I used to use. Find it's too soft to use between the microbore and the valve - doesn't take the pressure very well in hot weather.
Logged

Alex Gardiner

  • Posts: 7744
Re: alex black pole hose
« Reply #2 on: July 28, 2009, 06:52:43 pm »
Quote from: J&A Cleaning Services on July 28, 2009, 06:43:06 pm
did anyone noticed a difference in diameter for the 8mm black pole hose that Alex is selling ?i ordered one recently and i rather thinner than the old one which makes a big difference .i mean i can't fit the flow control anymore as it's thinner and comes lose.or maybe they put the 6mm tubing instead of the 8mm but checked the packing and on that foil that was wrapped it's says MH5/8BLK30M.anyway i might just give them a call in the morning.i was just wondering if anyone noticed any difference.thanks

I have noticed this myself.  The size is ostensibly the same but the problem only shows up when fitting the push fit flow valves.  It's as if the surface of the hose is slightly shinier than previous versions and won't allow the flow valve to grip as well.  The clear hose, which is the same size, seems to be unaffected.  I think I may have to give them a ring and talk to them tomorrow.
Logged

C.C.S.

  • Posts: 954
Re: alex black pole hose
« Reply #3 on: July 28, 2009, 06:57:09 pm »
any chance to swap it for a clear one ,Alex?as i would rather put the valve control on the polethe only problem is i managed to cut a few meters from the 30m role and realised  the problem after that. 
Logged

Alex Gardiner

  • Posts: 7744
Re: alex black pole hose
« Reply #4 on: July 28, 2009, 07:01:45 pm »
Quote from: J&A Cleaning Services on July 28, 2009, 06:57:09 pm
any chance to swap it for a clear one ,Alex?as i would rather put the valve control on the polethe only problem is i managed to cut a few meters from the 30m role and realised  the problem after that. 

No problem, I will get that swapped for you. Could you email me on alex@agardiner.co.uk with your details.
Logged

tomy jackson

Re: alex black pole hose
« Reply #5 on: July 28, 2009, 08:20:37 pm »
run a bit of sand paper rownd the end of the pipe
Logged

GWCS

Re: alex black pole hose
« Reply #6 on: July 28, 2009, 09:20:39 pm »
seems to be having lots of supplier problems lately Alex. Not really what you need is it..lol

and its usually them changing spec without you knowing  ::)
Logged

Chris Cottrell

  • Posts: 3162
Re: alex black pole hose
« Reply #7 on: July 28, 2009, 10:03:05 pm »
Ive had exactly the same problem on a new 24'hybrid xtel I bought from Gardiners, I gave sam a call and she replaced it with the correct length of clear hose .. problem solved
Logged
Pages: [1]