[JSMC]

who all sells these fittings?

[Window Washers]

who all sells these fittings?

Alex G, purefreedom and just about most good suppliers

[JSMC]

i thought alex g didn't sell these at all

[Window Washers]

i thought alex g didn't sell these at all

he calls them easy snap (maybe spelt wrong) they are the same thing I know this as I order 6 last week

[Alex Gardiner]

We market them under the EZ-Snap™ name.

[JSMC]

email sent

[LWC]

I believe Alex is the cheapest to so good all round 

[JSMC]

i need to ge tthem form PF as alex doesn't do the fitting i require to go onto my ball valve.

ideally i wanted to get all the stuff i am buying from the one place.

[LWC]

i need to ge tthem form PF as alex doesn't do the fitting i require to go onto my ball valve.

ideally i wanted to get all the stuff i am buying from the one place.

What you on about?

[JSMC]

i have the PF ball vavle set up and the male connector on exit side of valve alex doesn't do he told me

http://www.purefreedom.co.uk/store_hosespares.html

[LWC]

Come on msn

[JSMC]

jsmca74@googlemail.com new msn

[s.w.c]

We market them under the EZ-Snap™ name.

rectus type 21

[Alex Gardiner]

i have the PF ball vavle set up and the male connector on exit side of valve alex doesn't do he told me

http://www.purefreedom.co.uk/store_hosespares.html

We do not do the female thread to male fitting as JSMC wants. I would advise getting it from Pure Freedom if you want it all from one place 

[Window Washers]

i have the PF ball vavle set up and the male connector on exit side of valve alex doesn't do he told me

http://www.purefreedom.co.uk/store_hosespares.html

We do not do the female thread to male fitting as JSMC wants. I would advise getting it from Pure Freedom if you want it all from one place 

My Question is why do you not stock this Alex ? as there are loads of people using these fittings  : me for one, but do have loads of different taps from mis information on this site but gone back to what works well

[Alex Gardiner]

i have the PF ball vavle set up and the male connector on exit side of valve alex doesn't do he told me

http://www.purefreedom.co.uk/store_hosespares.html

We do not do the female thread to male fitting as JSMC wants. I would advise getting it from Pure Freedom if you want it all from one place 

My Question is why do you not stock this Alex ? as there are loads of people using these fittings  : me for one, but do have loads of different taps from mis information on this site but gone back to what works well

Most of what we stock is because I have either used it or see the need for it in a WFP set-up. This is not being dogmatic it's just how the business has developed. I personally would not use the type of set-up from PF (valve with male tail) so have never stocked them. Personally I would never put a valve on the end of the Microbore either, but we started stocking them for those that asked for it. The valves we stock have female ports so we should probably start stocking the tails with male threads (in fact I saw one on the shelf this week).

I always use a female shut-off on the end of the Microbore and a male tail on the end of the pole hose. I then have a small lightweight push-fit shut off valve on the pole hose.

I will look into stocking the female-male tail fittings though as they are easy for us to get in stock.

[Window Washers]

Your a good man Alex  , I will place the first order for them 

[[GQC] Tim]

That's cool, Purefreedom has got a online shop now too.

I must admit, Gardiners have got almost everything, and I order pretty much everything off them now, apart from having the best stuff, I like to support them in their business, they do a lot of good work, and they really push the industry to higher levels. One or two bits and pieces I sometimes get from different shops, mostly my traditional tools.

[JSMC]

aye get them stocked alex LOL