Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: 1 2 [3]  All

pingu

Re: 4040...on its way
« Reply #40 on: March 11, 2009, 07:04:42 am »
Hi ccmids...I have been wfp around 2,5 years and have not put a complete system together..so it'll just be following the idiot guide...lets face it there is not a lot to it...just getting the right connections and ensureing they fit in the right order.


...................he says now!

Cheers
Dave.
Logged

ccmids

Re: 4040...on its way
« Reply #41 on: March 11, 2009, 03:56:45 pm »
he said he was going to put diagram with order so things can be a bit easyer.
Logged

ccmids

Re: 4040...on its way
« Reply #42 on: March 11, 2009, 03:58:59 pm »
can only get 350 ltr tank in van , how long will that last me .
Logged

NWH

  • Posts: 16952
Re: 4040...on its way
« Reply #43 on: March 11, 2009, 05:53:32 pm »
Water input into pre filters.
After pre filters water into RO.
On the other end of the RO waste goes out of the bottom of the RO and the good water comes out of the end.
1 end of the RO should be closed off this is where the membrane goes with the taped line on the membrane being the last to go in,push in tight and replace the white clip.
Logged

NWH

  • Posts: 16952
Re: 4040...on its way
« Reply #44 on: March 11, 2009, 05:55:09 pm »
You should also have a pressure gauge before first pre filter and also 1 after 2nd filter this tells you tap pressure before pre filter and water pressure before RO.
Logged

ccmids

Re: 4040...on its way
« Reply #45 on: March 11, 2009, 08:13:22 pm »
ill make sure i get them thanks  didnt know that
Logged

pingu

Re: 4040...on its way
« Reply #46 on: March 17, 2009, 07:53:57 pm »
Found these nifty little connectors at my local garden center...no leaks whatsoever..unlike those Hozelock thingy's...

Cheers
Dave.
Logged

NWH

  • Posts: 16952
Re: 4040...on its way
« Reply #47 on: March 17, 2009, 08:38:52 pm »
Quote from: pingu on March 17, 2009, 07:53:57 pm
Found these nifty little connectors at my local garden center...no leaks whatsoever..unlike those Hozelock thingy's...

Cheers
Dave.
You have good pressure,better than me at the moment.
Logged

pingu

Re: 4040...on its way
« Reply #48 on: March 17, 2009, 09:12:14 pm »
I am finding that the pressure difference can be very big....from 40 to 60...
Logged

NWH

  • Posts: 16952
Re: 4040...on its way
« Reply #49 on: March 17, 2009, 09:53:09 pm »
It does that until the bedding in process is over the pressure drops and then suddenly rises,it`s happened more with mine today as it`s not used enough yet.
Logged

pingu

Re: 4040...on its way
« Reply #50 on: March 18, 2009, 07:24:25 pm »
Just been out fettling in the shed and putting together the backing board for my 4040 system...am building it with the recent -12 to -15 deg temps we had here (Holland)...

I'll be fitting a small boat tube heater with a thermofrost (thermostat) so that it'll start heating at around 3 deg....

Am putting it all together with the cold in mind as I said previously...so all the hoses will be drainable to stop freezing also.

It'll never be the flashest thing out there am building it as far as I can with scraps.

Cheers
Dave.
Logged

concept

Re: 4040...on its way
« Reply #51 on: October 07, 2009, 05:23:49 pm »
dave, got bored searching, and this was all i could find...wheres the rest of the pics of your system?! 8)
Logged

pingu

Re: 4040...on its way
« Reply #52 on: October 07, 2009, 07:31:28 pm »
Logged

concept

Re: 4040...on its way
« Reply #53 on: October 07, 2009, 07:49:31 pm »
thanks, such a clean looking set up. love it.
Logged
Pages: 1 2 [3]  All