[Mark Betts]

My 100 psi pump is leaking.

Does that mean its kerrrrnakkered!!!!!

or

can it be repaired

Ta


Mark

[Ken Wainwright]

You can by a service kit Mark, which will replace the consumable parts of the pump. When I ran Flojets I bought them from whoever was cheapest.

[Mark Betts]

Cheers Ken

And where might that be from??

Thanks


Mark

[Mike Halliday]

Mark where is it leaking from? have you tightened the jubilee clips I've found the pump heads last for ever it's always the motor that goes

Did I tell you I've got 2 pumps collecting dust in my shed a Shurflo 100psi and a Shurflo induction 135psi ( as fitted in Ashbys Ninja).

why not take this oppertunity to upgrade to a 200psi pump from ashbys ( cost £200ish)

Mike

[Glynn]

Good advice from Mick, a good time to upgrade.

Regards

Glynn

[HolmansUKLTD]

Mike,

I have a steampro 2100 can i have a 200psi pump fited to that type of machine?

p.s. thanks for the flyers and postcards

[Mike Halliday]

Nick, how much room  have you got inside? the 200psi pump has the same size motor as a shurflo but the pump head is a lot bigger approx 30mm x 50mm x 130mm

and the by-pass plumbing is different if you twiddle the solution lines you should get it in.

Mike

[Ken Wainwright]

Prochem, Extracta, Woodbridge, Ashbys, Alltec...... Virtually anyone who sells a machine with your model pump.

[Kinver_Clean]

It may well be the diaphragm leaking. I have some Flojet diaphragms lurking in the shed. If you want one let me know.

Trevor