Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

wightsurf

  • Posts: 1774
Re: Just orderd
« Reply #20 on: October 14, 2008, 08:28:28 pm »
can explain a bit more about the tape bit??I know why you tape it but need more info on how to tape it and what tape.Alsp read somewhere about  ptfe tape and silcon spray.
Any help thanks

regards
martin


NWH

  • Posts: 16952
Re: Just orderd
« Reply #21 on: October 14, 2008, 08:40:50 pm »
The top 5 sections have been completely re-worked to the 88ft standard.
NWH had a pre production pole.


No i didn`t i had 3 sections that had extra wrap on them,if what your saying is true i was sold a prototype pole which IMO is out of order.

Jeff Brimble

  • Posts: 4347
Re: Just orderd
« Reply #22 on: October 14, 2008, 08:44:09 pm »
Push the two sections together and start to wrap tape round where they meet so that you build up a few turns of tape which will then act as a "stop"to prevent the top pole compressing down any further over the bottom pole. If your fishing pole doesnt have a butt protector(the emporium does) do the same with the base to allow a small overlap which helps stop the wear form when you put the pole down on the ground. Also adds strength to the base.

RO-Sheen

  • Posts: 1308
Re: Just orderd
« Reply #23 on: October 14, 2008, 08:46:53 pm »
Can someone post some photos showing how to adapt a F16 (or other fishing pole) to wfp?
Formerly known as GARGAAX

Jeff Brimble

  • Posts: 4347
Re: Just orderd
« Reply #24 on: October 14, 2008, 08:48:56 pm »
The top 5 sections have been completely re-worked to the 88ft standard.
NWH had a pre production pole.


No i didn`t i had 3 sections that had extra wrap on them,if what your saying is true i was sold a prototype pole which IMO is out of order.

Someone has to be first, I am still using my "first" emporium. I have paid extra to keep it up to date. I thought the extra wrap didnt come out till later ? Maybe I am mixed up a bit when did you buy yours ? what did you do with it ?

wightsurf

  • Posts: 1774
Re: Just orderd
« Reply #25 on: October 14, 2008, 08:56:20 pm »
Push the two sections together and start to wrap tape round where they meet so that you build up a few turns of tape which will then act as a "stop"to prevent the top pole compressing down any further over the bottom pole. If your fishing pole doesnt have a butt protector(the emporium does) do the same with the base to allow a small overlap which helps stop the wear form when you put the pole down on the ground. Also adds strength to the base.

Thanks for that

Jeff Brimble

  • Posts: 4347
Re: Just orderd
« Reply #26 on: October 14, 2008, 09:03:56 pm »
Hi all thanks for the reply,,,no not sick and yes i did phone the other supplier..The pole is not ready from the other supplier and i have a very large job to do and needs a pole to do it.
The pole i'm getting has a roller on the back of the brush so that it can roll up the side of the building,and also did think about the fishing pole but did'nt go with that option!
Whilst looking at the DIY site i think i read jeffs review on this pole and am i right in thinking that this pole has had a slight change from the earlyer ones,
Have a look at there site see what you think!

Can you buy the rollers to fit on the brush separately and if so where from please? Similar to the the roller used on the Bentley brush.

Emporium are also fishing suppliers the rolers are derived from "pole rollers " and are I think unique to them. I prefer no roller and  I just hold mine straight up in one hand till I get to 35-45ft then lean the back of the brush against the wall to go higher. But the roller is  of help when going to the limits.

wightsurf

  • Posts: 1774
Re: Just orderd
« Reply #27 on: October 14, 2008, 09:48:55 pm »
Is there any reason why, you don't like the rollers ??

Captain Scarlet

  • Posts: 3087
Re: Just orderd
« Reply #28 on: October 14, 2008, 10:08:16 pm »
extra weight and they serve a purpose of solving a problem that hardly exists
Ffenest ( est 2007 ) is a fully insured premium quality window cleaning service based at Llandderfel near Bala. All our work is guaranteed, rain or shine, year round.

Jeff Brimble

  • Posts: 4347
Re: Just orderd
« Reply #29 on: October 14, 2008, 10:12:51 pm »
Weight or lack of it. I am now using c/f modular for low level everyday work, ok its not quite as fast to put up (but its faster to take down)as a telescopic but oh boy its a pleasure to use. Light poles, light brushes, light everything.
Mind you I suppose I got used to not using rollers so maybe you will get used to not using anything other than a roller. If you dont like rollers just put any old Bentley flocked brush on instead.
I find it interesting that Matt has made his Vikan cill brush really light as has riahehttrepur (you got to change that name again  ;) its a sxd difficult to to spell backwards)

wightsurf

  • Posts: 1774
Re: Just orderd
« Reply #30 on: October 14, 2008, 10:13:03 pm »
Hi riahehttrepuR
Do you have one of these poles ??? And if you do ,do you find it just as easy without the roller and think that this roller is not needed.

wightsurf

  • Posts: 1774
Re: Just orderd
« Reply #31 on: October 14, 2008, 10:15:32 pm »
Is there more info on the light vikan cill brush on the diy site?

Captain Scarlet

  • Posts: 3087
Re: Just orderd
« Reply #32 on: October 14, 2008, 10:16:11 pm »
yes ive got a Super-lite 2, ive held jeffs and a couple other emporium poles with the rollers. there nothing special, mainly because there on the bentley brush ( i hate the flocked bentley brushes )
Ffenest ( est 2007 ) is a fully insured premium quality window cleaning service based at Llandderfel near Bala. All our work is guaranteed, rain or shine, year round.

wightsurf

  • Posts: 1774
Re: Just orderd
« Reply #33 on: October 14, 2008, 10:21:28 pm »
I have never used the bently brush,any advice on this brush except dump it,lol
I have always diy the salmon brush,stuck with it for years but maybe a time for change .What do you use now and why?

Jeff Brimble

  • Posts: 4347
Re: Just orderd
« Reply #34 on: October 14, 2008, 10:24:46 pm »
Is there more info on the light vikan cill brush on the diy site?

Matts topic on diy site is http ://d.co.uk/phpbb/viewtopic.php?t=6865 but this forum wont let me post it  :o , so look on page 2 topics to for "I got my vikan down to 275gms" by Matt as far as I know hes the only one to do it with the Vikan. Maybe we should have competittions to see who can shave the most weight off. I drilled holes in mine between the bristles.
Dump the Bentley and lighten the Salmon, but the emporium is sold with Vikans so presumably it will take the weight.
.
.
.



( But they have a new shorter No1 section pole to take the weight)

Captain Scarlet

  • Posts: 3087
Re: Just orderd
« Reply #35 on: October 14, 2008, 10:26:45 pm »
ok, well maybe its alright for high maintenance cleans
Ffenest ( est 2007 ) is a fully insured premium quality window cleaning service based at Llandderfel near Bala. All our work is guaranteed, rain or shine, year round.

wightsurf

  • Posts: 1774
Re: Just orderd
« Reply #36 on: October 14, 2008, 10:29:13 pm »
I have had a vikan dumped in a bucket somewhere for a long time .Its only been used about a dozen times ,mainly to clean my car.lol
I will see what i can do with it  ;D
275 grms you say,got to give this a go

Jeff Brimble

  • Posts: 4347
Re: Just orderd
« Reply #37 on: October 14, 2008, 10:31:06 pm »
I think I would prefer Ruperts Tucker.


g,night.

Jeff Brimble

  • Posts: 4347
Re: Just orderd
« Reply #38 on: October 14, 2008, 10:33:52 pm »
I use a my own swivel brush for last 10 years- bought a half pallet load, but its another long story - got a couple spare if anyone wants to try as I have updated it.

wightsurf

  • Posts: 1774
Re: Just orderd
« Reply #39 on: October 14, 2008, 10:38:34 pm »
I would like to try this please.

I use a my own swivel brush for last 10 years- bought a half pallet load, but its another long story - got a couple spare if anyone wants to try as I have updated it.