[richywilts]

IV RECENTLY CHANGED THE RO UNIT ON MY IONIC SYSTEM YET ITS STILL TAKIN SAY 10HOURS TO FILL ANY IDEAS Y THIS IS HAPPENING I DNT PERFORM SALT BACKWASH AS I DNT KNOW HOW COULD THIS BE THE REASON.SHOULD I HAVE THE WASTE WATER OPEN SO THAT ITS RUNNING OUT OR TRICKLING??

ANY ADVICE WOULD BE APPRECIATED

[windowwashers]

IV RECENTLY CHANGED THE RO UNIT ON MY IONIC SYSTEM YET ITS STILL TAKIN SAY 10HOURS TO FILL ANY IDEAS Y THIS IS HAPPENING I DNT PERFORM SALT BACKWASH AS I DNT KNOW HOW COULD THIS BE THE REASON.SHOULD I HAVE THE WASTE WATER OPEN SO THAT ITS RUNNING OUT OR TRICKLING??

ANY ADVICE WOULD BE APPRECIATED

Have you changed your pre filters ?

[[GQC] Tim]

10 hours with a 4040?!

Like Ian said, definitely check the prefilters, also I would have a look at what your tap pressure is, do they come with a gauge? You might need a booster pump.

[richywilts]

NAH THE FIRST PRE FILTER IS BROWN BUT ON THE 600LTR SYSTEM I HAVE ITS BLUE TAKE IT THAT NEEDS CHANGING!!! IL SWAP THEM OVER TODAY.CHEERS.

HOW DO U CHECK THE PRESSURE

[P®oPole™]

Swapping the Pre Carbon around with the softner will make no difference at all mate. The old systems will have a softner for the first filter and on the newer ones it will be second down.

If you got your new RO from them aswell Its the CHAMP 4000, I dont rate them very much. Send it back or crack the housing and get a better membrane that will sort it out.

Pro

[[GQC] Tim]

Even with that membrane, it shouldn't take him 10 hours to fill a 300l tank.

[danny taylor]

could be a faulty RO, take it back asap