[jaykie]

When rinsing brush on do you pull back slightly or just turn flow right up and leave brush totally on window, as i done loads of 3 storey town houses today and rinsed with brush on, i zig zagged down the glass but put back a bit with flow higher than i would if rinsing brush off. I only did this on top floor as seemed pointles to do on ground and 2nd, i used sl-x and single trim sl brush.

Chris

[Wayne Thomas]

I brush on all the time on everything. Never have any problems. Use a good brush and a good flow of water.

[jaykie]

Didnt really ansewer my question

[windowwashers]

Didnt really ansewer my question

I tilt the brush a little with high flow of water

[Wayne Thomas]

Brush absolutely splayed flat against the glass, no messing about tilting the brush at a stupid angle half on & half off like NWH does. I don't do things by half measures. Brush totally on the glass without any support from me to refrain the brush sitting flush. Hope that answers your question

[dmlservices]

 i use a double trim brush and leave brush on lightly, so only outer brissels touch glass, i find double trim better for rinsing brush on

[NWH]

Chris come and pay me a visit 1 day and i`ll knock an hour off your working day for you lol.

[[GQC] Tim]

I leave the brush on, with no pressure, 1.6-2 litre per minute flow rate. Works beautifully.