This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

[GQC] Tim

  • Posts: 4536
Purefreedom 300GPD RO underperforming?
« on: June 17, 2008, 11:08:51 pm »
Hi, I'm having doubts about my RO.

235 In, 20 Out, 100PSI after pre filters.

Shouldn't the TDS out be a lot lower?

Haven't measured production/waste rate in a while, can't remember what it is.
Logged

easycleaner

  • Posts: 244
Re: Purefreedom 300GPD RO underperforming?
« Reply #1 on: June 18, 2008, 06:27:47 am »
Its not performing bad at all, do you carry out flushing out regular? how old is it or have you changed the pre filters?
Mart
Logged

Dean Taberner

  • Posts: 4164
Re: Purefreedom 300GPD RO underperforming?
« Reply #2 on: June 18, 2008, 06:37:52 am »
Have you got a DI filter? Mines about 240 going in 20 going out and then after the DI its 0.00
Logged
Operations manager at J.V Price Ltd

http://www.thepricegroup.co.uk

Simon_King

  • Posts: 103
Re: Purefreedom 300GPD RO underperforming?
« Reply #3 on: June 18, 2008, 07:58:58 am »
Having trouble setting up a link to my post :2 month old RO - ppm 30 plus

Have a look.
Logged

[GQC] Tim

  • Posts: 4536
Re: Purefreedom 300GPD RO underperforming?
« Reply #4 on: June 18, 2008, 09:43:16 am »
Yea I'm flushing it regularly, have only done about 4000l, so prefilters shouldn't need to be changed yet I think.
Logged

mark dew

  • Posts: 2901
Re: Purefreedom 300GPD RO underperforming?
« Reply #5 on: June 18, 2008, 10:58:58 am »
Is it 20 as soon as you turn the valve to production?
My 300gpd from ro-man has water going in at 480ish and comes out around 25. But i disconnect the hose to the DI vessel and let it run for 5 minutes. After this it has come down to 7ppm.
Logged

[GQC] Tim

  • Posts: 4536
Re: Purefreedom 300GPD RO underperforming?
« Reply #6 on: June 18, 2008, 11:01:09 am »
Hmm, there's a thought, I measure it straight from the tank. (From the tank it goes to the DI) The water in the tank is at 20.
Logged

Dean Taberner

  • Posts: 4164
Re: Purefreedom 300GPD RO underperforming?
« Reply #7 on: June 18, 2008, 05:21:38 pm »
Itl be 0.00 from the DI then mate. Panic over 8)
Logged
Operations manager at J.V Price Ltd

http://www.thepricegroup.co.uk

[GQC] Tim

  • Posts: 4536
Re: Purefreedom 300GPD RO underperforming?
« Reply #8 on: June 19, 2008, 02:05:34 am »
Quote from: deantaberner on June 18, 2008, 05:21:38 pm
Itl be 0.00 from the DI then mate. Panic over 8)

True, but the lower the better, resin will last longer then won't it.

Was just wondering if those figures are okay, it did spend a couple of very frosty nights in the workshop unprotected. Not sure if it got under zero in there, but might have messed things up, wasn't filled with water though.
Logged

Simon_King

  • Posts: 103
Re: Purefreedom 300GPD RO underperforming?
« Reply #9 on: June 19, 2008, 05:50:55 pm »
How old is your RO? Mine is 2-3 months old and I had a similar problem.
Ive got a 200GPD and my TDS out the RO is now 11ppm. My tap water is 288-310ppm
Prior to replacing my membranes it was 30ppm post RO.
The membranes on it where cheap ones with 'technology derived in USA' written on them.
Mine is a Purefreedom RO.
As you can see 20ppm isnt special when your water is 235 to start.
I'm not over pleased with mine still because with my old system (100GPD!) my tds out was 6ppm!
Logged

[GQC] Tim

  • Posts: 4536
Re: Purefreedom 300GPD RO underperforming?
« Reply #10 on: June 19, 2008, 10:04:57 pm »
I'll have a look tomorrow what it says on there, but it's older then that.
Logged
Pages: [1]