[Chris R]

What do you use to protect a window frame or other item from the heat of a "red hot solution line"?

I often leave the machine outside and run the hoses through the window, but am concerned about the potential for damage to the frame. The pipe may be in place for 6 hours or more and the weight of the hose is pressing it hard onto the frame.

I use a towel or sheet at the moment, but heat will still pass through them. Perhaps something with foil in it?

Any ideas?
Chris

[lee_gundry]

i use a dust sheet folded 4 times to give a thick pad & drape this over the frame & sill.

the heat that may pass through is not going to dammage the surface.


Lee G

[martin19842]

hi there,

just been thinking about this, pplumbers use a heat resistant pad. placed to protect walls from the burner when working on pipework,

theses disiapte the heat extremely quickly

therefore maybe a trip down to the plumbers merchants

just an opinion

regards

martin

[Len Gribble]

Chris

I use the same method as Lee

Martin

Good idea

Len

[Dynafoam]

I use my hose anchor on the window sill, so the hose does not come into contact with any paintwork.