[m.b.s.]

if i wanted to put one of your goosenecks on the ionics pole what will i need and how would i do it it just so i dont have to keep buying ionic products as these are expensive

[m.b.s.]

the g fit goose neck

[m.b.s.]

the g fit goose neck are these any good for commercial

[Alex Gardiner]

Hi mbs

The G-Fits are great for commercial work and they simply screw on to the end of the Ionics multipoles. Any of the other Ionics poles, you would have to chop off their end connector and glue in an aluminium or plastic end screw before screwing on the G-Fit.

[m.b.s.]

Hi mbs

The G-Fits are great for commercial work and they simply screw on to the end of the Ionics multipoles. Any of the other Ionics poles, you would have to chop off their end connector and glue in an aluminium or plastic end screw before screwing on the G-Fit.

so is it easy to do

[Alex Gardiner]

If you have a multipole from Ionics then simply follow the instruction that come with the G-Fit for fitting (tools needed 1x 9mm drill bit to drill through the top of the plastic fitting to convert it to a hose through end fitting).

If you have any of their other poles with their gooseneck fitting on the end, you will need to remove this first (hacksaw off) then glue in one of the hose-through fittings below:





Then simply screw on the G-Fit and your choice of brush.

We have coming this week two new sizes of G-Fit in addition to the standard Gfit Type2 (17" reach), a slightly shorter reach Type2 (12" reach) and even shorter reach Type2 (6" reach). As soon as they come in they will be on the website. We have had these produced due to customer demand, many users do not like the plastic necks, but also do not need such a reach as the standard G-Fit hence the new choice in reach.

[m.b.s.]

so will these fit ionics uni c/f also what would your prefered choice in lenth of goose neck as i donot want to go too big nor too small

[Alex Gardiner]

Both of the above fittings will fit Ionics uni c/f.  My preferred choice of gooseneck is the standard type 2 G-Fit (17 inch).  However I think the next size down, when it is available next week, will become very popular.

[m.b.s.]

Both of the above fittings will fit Ionics uni c/f.  My preferred choice of gooseneck is the standard type 2 G-Fit (17 inch).  However I think the next size down, when it is available next week, will become very popular.

what is the glue to glue it on

[[GQC] Tim]

I'm quite certain it's this :

www.gardinerpolesystems.co.uk/acatalog/Misc._Items.html

[Alex Gardiner]

Both of the above fittings will fit Ionics uni c/f.  My preferred choice of gooseneck is the standard type 2 G-Fit (17 inch).  However I think the next size down, when it is available next week, will become very popular.

what is the glue to glue it on

I would use this product:



www.gardinerpolesystems.co.uk/acatalog/Misc._Items.html

Either that or a twin pack of rapid epoxy resin works very well. (Asda or B&Q)

[m.b.s.]

thanks  so its easy to do as i do not want to brake the pole?
also how much will the new gfit be when you get hem in

[Alex Gardiner]

About the same price as the current ones, as they cost us exactly the same to make