This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

JSMC

  • Posts: 3511
water supply
« on: January 09, 2008, 06:23:59 pm »
how do you all go about setting up your supply of water to your units etc and tank?

Re: water supply
« Reply #1 on: January 09, 2008, 06:28:24 pm »
how do you all go about setting up your supply of water to your units etc and tank?
with a hose.

if this is not the answer you needed can you explain in a little more detail  ;)

Ian

JSMC

  • Posts: 3511
Re: water supply
« Reply #2 on: January 09, 2008, 06:30:13 pm »
do people have them all connected up  via pipe or just outdoor tap using hose

Re: water supply
« Reply #3 on: January 09, 2008, 06:32:34 pm »
do people have them all connected up  via pipe or just outdoor tap using hose
I use a hose, it will depend on your setup alot, but a hose is ok unless you have the beast I just saw on another post then I would not be so sure.
I have a 4040 and use standard hose and outside tap.

Ian

Jon-scwindows

  • Posts: 645
Re: water supply
« Reply #4 on: January 09, 2008, 06:42:09 pm »
for the average RO  i use a normal hose connected to the outside tap, my outside tap was leaking, and they may well leak allot if you have those rubbish plastic hoselock connectors anyway i put a new tap on with just a normal 1/2 '' outlet like a copper pipe, then used a jubilee clip to tighten it on, there are no leaks atall! much better

as for the 'beast' ian is mentioning well for that still i use the garden tap for because its supply comes from a 300gallon tank, the tank supplies the normal tap water to the ro unit via the pump which is constantly on to supply enough pressure to the twin 4040s, the tank is there to ensure theres enough water for the pump to suck if the pump was connected straight to the outside tap, then the pump would be running slightly dry as the tap pressure cannot supply enough water to it. This would usually be supplied via mains water pressure.

Usually you would only need a booster pump to run through the ro if your pressure is low. You dont really need another plumbing source just for the Ro like a washing machine or dishwasher has, its just unnecessary.

Re: water supply
« Reply #5 on: January 09, 2008, 06:45:46 pm »
I just had a thought, when I move I will get my uncle to install mains pressure for new system.


Jon-scwindows

  • Posts: 645
Re: water supply
« Reply #6 on: January 09, 2008, 07:18:42 pm »
cool,  do you know how they do it?  i thought that all domestic properties just have normal supply, like for the whole road you have a stop cock under the pavement for on off. Can you get mains water pressure at home?

Re: water supply
« Reply #7 on: January 09, 2008, 07:46:27 pm »
cool,  do you know how they do it?  i thought that all domestic properties just have normal supply, like for the whole road you have a stop cock under the pavement for on off. Can you get mains water pressure at home?

I dont know if this is possible, my uncle works for the water boards and fixes mains water so will find out when I speak to him.