Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

mark shannon

  • Posts: 961
Clearwater Rinse
« on: January 06, 2008, 05:41:03 pm »
Any one use Hydramasters Clearwater rinse? looking at their site it says the PH in dilution is 2.7 is this a little too acidic. Would chemspecs Highheat be a safer choice for an acidic side rinse? Or should i stick with Prochems F&F rinse

mark_roberts

  • Posts: 1899
Re: Clearwater Rinse
« Reply #1 on: January 06, 2008, 08:30:44 pm »
Wouldnt have thought so as youll never get the carpet to PH2.7.

If you clean at PH9 and rinse with this at PH2.7 wouldnt it leave the carpet around 7 neutral.

Never claimed to be a chemical expert but Doug Holloway seems to be the resident expert on here so maybe he can explain better.

Mark

mark shannon

  • Posts: 961
Re: Clearwater Rinse
« Reply #2 on: January 06, 2008, 08:38:08 pm »
Yes true but i have never come across an acidic rinse with such a low ph

Glynn

  • Posts: 1129
Re: Clearwater Rinse
« Reply #3 on: January 06, 2008, 08:51:56 pm »
Thats the best acid rinse on the market !.
Regards
Glynn

Joe H

Re: Clearwater Rinse
« Reply #4 on: January 07, 2008, 01:16:10 pm »
Just putting a tub of Hydramaster Blitz in my van for a job tonight (might need it).
This has a PH at use dilution of 12.0 - 12.5
tub also adds - to neutralise alkalinity, rinse or pre spray with Hydramaster Rinse Out or ClearWater Rinse(PH2.7).
So using a high and a low at these levels will leave around neutral.
Prochem Fibre & Fabric Rinse is PH4

Doug Holloway

  • Posts: 3917
Re: Clearwater Rinse
« Reply #5 on: January 07, 2008, 03:54:04 pm »
Hi Guysimes more basic

Joe has made a good point as most Prochem products are pH 9 - 10, then pH 4 will neutralise.

However Chemspec at pH 12 would need a much more acidic product to neutralise , everything else being the same, so 2.7 makes sense.

Remember the pH scale is logarithmic so pH 12 is 100 times more alkaline than 10.

Cheers

Doug


Ken Wainwright

  • Posts: 2107
Re: Clearwater Rinse
« Reply #6 on: January 07, 2008, 04:47:19 pm »
To complicate matters further, an issue often of greater relevance than the "on the label pH"  is the buffering. For example, it's possible to have a pH10 self neutralising product that meets Woolsafe requirements (Ultimate Master used to be like this) and then you could have a pH7 buffered solution that fails the same test.  Ph on it's own is only part of the equation.

Safe and happy cleaning :)
Ken
Veni, vidi vici, Vaxi
I came, I saw, I conquered, I cleaned up!

Doug Holloway

  • Posts: 3917
Re: Clearwater Rinse
« Reply #7 on: January 07, 2008, 05:29:14 pm »
Ken

As understand it the Alltec product still would meet Woolsafe, but Alltec choose not to spend the £3000.

Cheers

Doug

Ken Wainwright

  • Posts: 2107
Re: Clearwater Rinse
« Reply #8 on: January 07, 2008, 05:32:16 pm »
Hi Doug

I've heard too that Alltec made a commercial decision not to remain with the Woolsafe scheme, and that the product had not been reformulated.

Safe and happy cleaning :)
Ken
Veni, vidi vici, Vaxi
I came, I saw, I conquered, I cleaned up!

carpet guy

Re: Clearwater Rinse
« Reply #9 on: January 07, 2008, 06:38:44 pm »
The opt out decision was made about 8 years ago and I think the change was physical rather than chemical but I could be wrong. I'm sure Steve keeps an eye on here, so you will probably get an answer.

Jeff Lydon/Greenie

  • Posts: 61
Re: Clearwater Rinse
« Reply #10 on: January 12, 2008, 03:58:23 am »
I used to love HM Clear Water rinse, excellent product, didn't use it all the time, mostly on urine jobs.


Re: Clearwater Rinse
« Reply #11 on: January 12, 2008, 06:29:56 am »
Seems a lot give creedance to this clearwater revival  ::)

mark shannon

  • Posts: 961
Re: Clearwater Rinse
« Reply #12 on: January 12, 2008, 09:22:11 am »
 ;D ;D ;D

Amethyst

Re: Clearwater Rinse
« Reply #13 on: January 13, 2008, 11:36:44 am »
I can't add much more except to say IMO it depends what you use it with. Like Joe I carry Hydramaster's Blitz for those jobs which are "challenging" it folloes then that you are likely to need a more acidic rinse to get back to neutral. With microsplitters being so good I find I use it less and less but it's there if needed. I just happen to like the crisp smell it has, makes a change to the cherry/orange/citrus smell.