[surrey pressure clean]

hi there do you now a chemical that will move oil from a driveway on block paving i only have a cold pressure washer thanks chris

[drive surgeon]

oil remover!!!!   lol, just kidding my friend!     try jizer or gunk!  just scrub it on the wash of.

[drive surgeon]

go to the search thing at the top of the page, then type in oil remover, it has been asked lots of times this question!

[Ged]

tech clean oil remover is good.

[steve doyle]

second that!

[drive surgeon]

i have not tried it but sounds good,  steve whats the best way to use it?  just brush it in and wash off?

[steve doyle]

dont even need to brush it in pal.

brick needs to be dry, i just poor alittle into the cap and drip onto the centre of the stain, allow it to spread out and soak in, leave 10,mins or so (only put enough on to just cover the stain, you dont want to spread it). then just rinse away and add more pressure if needed.

if you need to repeat it you can work it in alittle but again it needs to be dry to start with (90% first treatment is enough).

one tin (5ltr?) will do you for years, unless your working down at castrol!