[Andy@w.c.s]

 Hi all
I have a small drip on the in let side of my di vessel
Can anyone tell me if the inlet and outlet are fixed from inside the head or do they screw in to it ,
if they screw in can i take them out and put some ptf tape around the thread ?
sorry to be so anal but i have not had to change my resin so i have not had the top off 
Thanks folks
Andy

[Alex Gardiner]

They are screwed in so you should be able to unscrew, PTFE tape the thread and screw back in.

[Andy@w.c.s]

Thanks Alex 

[windowwashers]

I have not had to use PTFE tape as yet, I guess the more and more I use it then will have to.

[Captain Scarlet]

I had the same problem but I changed the pfte a few times but still had a leak. Then I realised their was a very thin crack in the fitting, Luke