[Alistair@AWC]

Hi Guys

Im in the process of fitting a couple of Varistream pump controllers and its all pretty straightforward except for one thing

The Varistream bypasses the pump pressure switch, now do I bypass the pressure switch by connecting the red wire from the pump to the Varistream or do I allow the wires to pass through the pressure switch then connect to the Varistream.

Any help would be appreciated

Al

[Elgin Sparrowhawk]

No pressure switch needed with the varistream.

[batterbee]

Hi Al

As far a i can remember you just remove the red wire that goes to pressure switch , on the top of the pump,

The red wire coming out of the bottom of the pump is what goes to the varistream.

John

[brightnclean]

Hi Al

As far a i can remember you just remove the red wire that goes to pressure switch , on the top of the pump,

The red wire coming out of the bottom of the pump is what goes to the varistream.

John

Give that man a gold star!!! 

Correct  .. err except for there is a black wire as well as the red one left on the pump when u pull out the one from the pressure switch. 

[batterbee]

Hi Al

As far a i can remember you just remove the red wire that goes to pressure switch , on the top of the pump,

The red wire coming out of the bottom of the pump is what goes to the varistream.

John

Give that man a gold star!!! 

Correct  .. err except for there is a black wire as well as the red one left on the pump when u pull out the one from the pressure switch. 

Dam! forgot the black wire 

[Alistair@AWC]

Right so you manually bypass the pressure switch then

Cool Cheers Guys