Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

xxmattyxx

Detailing
« on: July 05, 2007, 03:52:27 pm »
What do you Trad shiners use when detailing.

Ive only ever used dis-used household towels and find they do a reasonable enough job, but if they were so wonderful surely we'd all be using them.

The scrim thats available usually comes in sizes far too large for my liking, thats one of the joys of cutting up old towels, I prefer something about a foot square.

Is there anything you guys would recommend as Im going through a review of everything Im doing.

Thanks.

Matt

simon knight

Re: Detailing
« Reply #1 on: July 05, 2007, 03:55:09 pm »

Just scrim mate. Have moved away from Micros cos I don't think they're as absorbent.

You can cut a good quality scrim in half and get yer missus to hem it.

drakestar!

  • Posts: 311
Re: Detailing
« Reply #2 on: July 05, 2007, 03:55:51 pm »
microfibre cloths

xxmattyxx

Re: Detailing
« Reply #3 on: July 05, 2007, 03:58:33 pm »
Those microfibre cloths





dont look like they'd absorb jack-nutse though

Might have to do that Simon, ta.

Matt

Trevor Knight

  • Posts: 1825
Re: Detailing
« Reply #4 on: July 05, 2007, 04:09:11 pm »
There are plenty of suppliers who sell 1 meter sq scrim, just cut and hem it, takes minutes.

If you find a local dry cleaners they often have seemstresses who will do loads for you for an hourly rate.

regards,

trevor
Covering Hampshire, Dorset, Surrey, Berkshire

mark dew

  • Posts: 2901
Re: Detailing
« Reply #5 on: July 05, 2007, 04:33:35 pm »
i use microfibre for most of the detailing i do now. Depending on which is better for the job. I use to cut scrims in half when i started but after a few months they would seem to shrink to something not much bigger than a handkerchief. Leave them whole now.
I do like a well worn scrim for normal windows. Though i only seem to detail
very old leaded windows nowadays. And i find microfibre better for those.

Richy L

  • Posts: 2257
Re: Detailing
« Reply #6 on: July 05, 2007, 04:59:41 pm »
i used to use scrim all the time but now its microfibres all the way. i usually only get through about two a day. if its hot i only need one micro all day. far far better than the scrim!


richy

East coast window cleaning Services

  • Posts: 1458
Re: Detailing
« Reply #7 on: July 05, 2007, 05:01:09 pm »
when i started out i used microfibres but for the last 3 years been using scrims there brilliant when there beded in and been washed about 200 times.
P&R Window Cleaning

dai

  • Posts: 3503
Re: Detailing
« Reply #8 on: July 05, 2007, 07:05:32 pm »
Scrim for me too, I like them big, it's easier to find a dry, clean bit. Even more so when the rubber seals start going black.
I hate old scrims, I have some that have been washed hundreds of times, they aren't as absorbent. I like a new scrim that has just been broken in, I find, being rougher, it has far more bight on the glass.
I have used scrim before we ever had squeegees. I think that saying the old scrim is best, is the biggest myth in window cleaning.
What do you other old timers have to say on this. Dai

brett walker

  • Posts: 1943
Re: Detailing
« Reply #9 on: July 05, 2007, 11:27:45 pm »
microfibre  8)
they are also good for wipeing frames


brett

Sir Squeaky

  • Posts: 8341
Re: Detailing
« Reply #10 on: July 05, 2007, 11:47:00 pm »
As I do about 75-80% of my work wfp now, I forget to clean my microfibre.

I used it on my pubs this morning, then realised it hadn't been washed for about 3 or 4 weeks. ;D
I must have done £100's with it!
Probably made the job a bit harder than it needed to be.  :-[

Highrise

  • Posts: 330
Re: Detailing
« Reply #11 on: July 06, 2007, 01:37:19 pm »
I use a beer towel to wipe excess water away and wipe frames around then scrim... Lovely job  8)
When your windows are clear, My conscience is clear...

edd

  • Posts: 960
Re: Detailing
« Reply #12 on: July 06, 2007, 10:55:48 pm »
I use wfp to detail simple wash and go!!!!!!!!!

but microfibres are best imo

Tosh

Re: Detailing
« Reply #13 on: July 06, 2007, 11:05:24 pm »
Matty,

When you first buy scrim, it does seem big and bulky; but once it's been broken in properly it's great.

You'll love the size.  Wor Lass - and she's only little - used to find them too big, but now prefers there size; uncut and big.  (No sexual innendo intended or implied).

For routine trad window cleaning, I prefer scrim.  It's big and robust and lasts for ages once you hone your squeegying technique.


jikwan

  • Posts: 445
Re: Detailing
« Reply #14 on: July 07, 2007, 12:27:19 am »
guess you guys dont think much of using paper
its lightning fast, absorbent, and has a real drag that
clears away detergent deposits where scrim slides over it
comparatively expensive though  and has limited uses

Zen is the art of seeing everything.....noticing nothing

mark dew

  • Posts: 2901
Re: Detailing
« Reply #15 on: July 07, 2007, 12:34:42 am »
guess you guys dont think much of using paper
its lightning fast, absorbent, and has a real drag that
clears away detergent deposits where scrim slides over it
comparatively expensive though  and has limited uses

For the 1st 6 months of wc my arms felt like they were going to drop off waving a scrim around like a madman.
What sort of paper do you use and would my arms feel like those 1st 6 months again if i tried it?

jikwan

  • Posts: 445
Re: Detailing
« Reply #16 on: July 07, 2007, 12:38:58 am »
rolls of paper  like handdrying stuff in the washroom
2 quid a roll or much less by the box   from janatorial suppliers  yellowpages
Zen is the art of seeing everything.....noticing nothing

jikwan

  • Posts: 445
Re: Detailing
« Reply #17 on: July 07, 2007, 12:43:51 am »
try experimenting with different types  thin thick etc
downside is use only for detailing  not for wipingblade sills frames nose etc
Zen is the art of seeing everything.....noticing nothing

xxmattyxx

Re: Detailing
« Reply #18 on: July 07, 2007, 10:07:20 am »
try experimenting with different types  thin thick etc
downside is use only for detailing  not for wipingblade sills frames nose etc

No where else then that you'd like to share with us?  ;D  ;D