[gmccleaning]

ive got a prochem steameasy 400  (70psi pump & 1200 2 stage vac) how much hose could i work with ,

thanks        george

[scott.]

I would guess 5o ft...not  sure..

[spindle]

imo

i wouldnt use any more than 25ft.......................
 the machine has very low pressure..............
i dont think that u would get much water lift after the clean!

but there are many better informed people on here who may express an opinion!

[spickandspan]

I have been using that machine for 15 years now and have nothing but praise for it.
I use 25ft for normal jobs but use 50ft if working upstairs.
Its a very good machine very light and simple to use i have had NO trouble with drying time also i use just one jet on the wand get fantastic results.

[davep]

I use 25ft but may try 50, too heavy to carry upstairs.  Never had any probs with drying times and great results.

Need to give it a service tomorrow, any tips?

[David_Annable]

Hi

I had one for many years & would run 50 ft max with the aid of a turbo dryer.

Dave

[spickandspan]

Replace bushes in vac motor.

[davep]

Ta mate, will take a look now.  Where can i get the brushes?  Also what do you do to keep th epump pumping 100%?

[davep]

They are a pain to empty the waste, the tap is about 2 inches above the bottom.  Need to tip and wobble it and still not completely empty..

[scott.]

Just tip a few buckets of cold water in there when you're done, an flush it out.