[jouk45]

i have been using T connectors for my spray nozzles for years now, but what i noticed some times the water going through the connector, and one spray nozzle gets a bit more water than the other, now if you look at the newer version below, you can see its more Ario dynamic than the old T connector, i think this new shape would work much better, unless anyone has tryed, or using it now can tell me better, what do you guys think

[DASERVICES]

Jouk whats the matter with the ordinary 'Y' connections.

Doug

[gaza]

Would make it easier to disconnect when changing brush heads , is the only advantage I can think off.

 gaza

[jouk45]

Jouk whats the matter with the ordinary 'Y' connections.

Doug

d.a, its just that no one has ever questioned it before, the newer y connector is much sleeker, and the water would flow without much restriction, allowing a more even spray from the nozzles. i know its not a big issue,
but just thought i would point it out, i have ordered some, so will let you know the out come,

[D.Salkeld_Ltd]

Hi,

I use these connectors as I found the Y connectors I had had a nsty habit of pulling apart..........................at 30'!!!!!!!!!!!!!.  These I got from our local RO manufacturers.

Much, much better.

David

[Jeff Brimble]

You would be amazed how a drop of superglue stops them coming apart. You must use a lot of pressure.
I make joints between small 4mmID/6mmOD and 6mmID/8mmOD by pushing them in quick with superglue. No fittings 

[D.Salkeld_Ltd]

Thought of that Jeff, but didn't want the joint quite so perminant!!!!!!!!!