Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Clear Vision

  • Posts: 1908
How do you fit these jets to a brush?
« on: September 26, 2006, 07:18:03 pm »
I just got one of gaz's brushes and a couple of cleantech's push fit fan jets.

How on earth do I fit them ???

What other fittings will I need?

What size of pipe will I need?

I am going to fit the brush to a 2.4m pole (2 section) What piping will I need?

Cheers

Matthew

matt

Re: How do you fit these jets to a brush?
« Reply #1 on: September 26, 2006, 07:55:26 pm »
i did a guide to building a brush

its on the DIY site

http://www.d.co.uk/brush/


Clear Vision

  • Posts: 1908
Re: How do you fit these jets to a brush?
« Reply #2 on: September 26, 2006, 10:46:26 pm »
Thanks matt. thats great ;)

Where can I get the bulkhead connectors from?

Matthew

chris@c.m.s

  • Posts: 1556
Re: How do you fit these jets to a brush?
« Reply #3 on: September 26, 2006, 11:16:29 pm »
Mathew what pole are you hoping to put your brush onto?
 
Sussex by the sea

matt

Re: How do you fit these jets to a brush?
« Reply #4 on: September 27, 2006, 08:39:02 am »
Thanks matt. thats great ;)

Where can I get the bulkhead connectors from?

Matthew

cleantech, only a few quid

JM123

  • Posts: 2095
Re: How do you fit these jets to a brush?
« Reply #5 on: September 29, 2006, 12:42:38 am »
esiest way is to drill 2 8mm holes and push them through with the hose on them from the bristle side  - nice tight fit and takes 2 mins
Live life in the fast lane.......if you break down you'll freewheel further

Ballymena N.I

s.hughes

Re: How do you fit these jets to a brush?
« Reply #6 on: September 29, 2006, 08:35:30 am »
I dont think that jet needs a bulkhead connector. I could be wrong but cleantech do 2 types of them jets and one needs them the other dont

steve

matt

Re: How do you fit these jets to a brush?
« Reply #7 on: September 29, 2006, 10:18:11 am »
I dont think that jet needs a bulkhead connector. I could be wrong but cleantech do 2 types of them jets and one needs them the other dont

steve

the jet is in the pic next to the brush, and its the type that needs the bulkhead connection

JM123

  • Posts: 2095
Re: How do you fit these jets to a brush?
« Reply #8 on: September 29, 2006, 06:48:57 pm »
here's how its done - NO bulkhead required.

sorry for the poor picture quality but I had to use the phone to take the pics
Live life in the fast lane.......if you break down you'll freewheel further

Ballymena N.I

Jeff Brimble

  • Posts: 4347
Re: How do you fit these jets to a brush?
« Reply #9 on: September 29, 2006, 06:50:34 pm »
You got woodworm in that brush too  ;D

JM123

  • Posts: 2095
Re: How do you fit these jets to a brush?
« Reply #10 on: September 29, 2006, 07:00:21 pm »
No actually its ventilation holes as I work so fast I need to ventilate the brush to stop it overheating.
Live life in the fast lane.......if you break down you'll freewheel further

Ballymena N.I

Jeff Brimble

  • Posts: 4347
Re: How do you fit these jets to a brush?
« Reply #11 on: September 29, 2006, 07:15:27 pm »
That will be a new topic then
 "Help what removes friction burns off glass ? "

JM123

  • Posts: 2095
Re: How do you fit these jets to a brush?
« Reply #12 on: September 29, 2006, 07:43:17 pm »
 ;D ;D ;D ;D ;D ;D

gg4!!
Live life in the fast lane.......if you break down you'll freewheel further

Ballymena N.I