[s.hughes]

I need a gooseneck that is longer than the black plastic one that comes with most poles. I have a threaded end on my pole and need a longer goose neck. Garderner systems do one but they are on hols at moment and I need one before Friday.
Has anyone got any good links to sites that sell some.

Cheers
Steve

[Terry_Burrows]

try the unger tools they may have

[s.hughes]

I have a metal unger goose neck but it cant be used on a threaded pole end.

Steve

[Jeff Brimble]

Q. can u heat up and tap off (temporarily) the threaded  cone on your pole, then will the unger elbow adapter fit inside the alu tube, then maybe you could drill 2 holes to accomodate the Unger spring clips.
Or maybe you could use two of the plastic goosenecks together.

[s.hughes]

Good question, but this pole is going 45 ft so I would have to make sure it was 100% safe. Also although its an idea I shouldnt have to do it as there should be a larger goose neck out there.

Steve

[*foxman]

If it's the standard goose neck which fit vikan brush heads, etc then why don't you just get another angle neck and screw it on to the first one? Twice the reach.

[james cairns]

if you can do that with an extra goose neck then can you not do it with several to get the goose neck you need

jinky

[s.hughes]

Thats what I've been looking at as it seems the only way, strange that I have to do this though.

Cheers
Steve