[James pryer]

Hi all,
Got a job next week to clean a ladies cladding. She has fibre cement cladding that has been painted. What chemical would you recommend using?

I have used Ubix on timber frames before and have seen some of the white frame paint come off.  Don’t want this to happen on all the cladding.
I don’t have access to hot wfp.

Would lowering my Ubix ratio work? What to?
Or is screwfix degreaser better?

Thanks

[Smudger]

You will always get some paint residue come off if the paint is decomposing or flaking

depending on what the staining or dirt is I would use hypo - spray it on leave 10 mins a rinse off at low pressure with a p/w or lightly scrub with wfp

Darran

[Splash & dash]

We usually use a hypo mix ,as it will kill algi , but Virosol or similar will work ok .

[James pryer]

We usually use a hypo mix ,as it will kill algi , but Virosol or similar will work ok .

What strength  hypo would you recommend?

[Same]

Go with mild liquid cleaning dishwasher, stay away from abrasive cleaners available in the market.

[Splash & dash]

We usually use a hypo mix ,as it will kill algi , but Virosol or similar will work ok .

What strength  hypo would you recommend?

7-1 should be ok for green algi

[the king]

Ive used hot wfp with grate results