[Darren H]

I've just fitted another pump it works as in powers up but hardly pumps any water I've bypassed the hose reel to eliminate that but still only a bit of water.
I've tried sucking on the hose to encourage the water to start flowing but i get a bit of water then it's like the hose is just closing in.

Has anyone had a job to get water into a new pump for the first time before.

[Spruce]

Have you opened the tap on your tank?

[p1w1]

Have you opened the tap on your tank?

  I actually did this the other day, messing around for over 5 mins wondering why the pump was not working then remembered id turned the tank tap off the night before.

[nathankaye]

Also have you connected the right end to the inlet
 

[Darren H]

Yes tank tap is open my other pump had pulled water through.

[Don Kee]

Unclip from your hose reel and let the hose hamg out the van for a bit of a siphon help. Then turn your pump up to full whack and see if it kicks in after a 10-15seconds.

If not then is your battery charged? We always have one pump coughing and spluttering before the other when the batteries low even though both pumps are they same age.

[Darren H]

All working now once tank was full it pulled water through and is now fine.