Unwrapped it and it all looked good. Everything is contained within the tank, pump (flo jet) and filter, controller, battery and di vessel if you have ordered the di version.
+ The di vessel comes filled with resin which there is no mention on the website.
- If you've ordered the delivery only option then it won't have the hose or vessel bracket included and the tank will be plumbed direct to the pump.
- The battery is a Yuasa 70ah not an 85ah as advertised " powerfull 85ah battery".
- There was no mention of inlet or outlet connections for filling or draining and there isn't any.
- The tank colour as expected is black and you can't see the water level. Could do with a clear pipe up the side of the tank connected at the bottom and top which would show the water level.
- Panels attached to the tank to contain the battery and controller have been poorly fitted and sit too low down (slightly).
The controller has been used as a hockey puck (see picture)
+ Configured the controller on the second attempt and the system all works as it should, dead end detection battery voltage indicator etc.
+ The hose reel can be bolted to the tank length ways or side ways, which there's no mention of.
As I've bought this earlier than planned I'm running it from a pickup truck which meant I was limited for high, so I have the reel sitting next to the tank.
The big talking point will be how you fit the tank to your vehicle. The fitting kit includes four S shape brackets which are screwed to the delivery pallet with screws, the same are used for fitting plastic coated metal roofs or facades. I assume they are rated and your mechanic will decide which bolts to use if bolting it to the vehicle is your thing.
This isn't a problem as I've used Velcro!
