[Paul Moss]

I've owned a quite a few machines over the years  and a couple of months ago a local buy folded and asked me to buy some of his kit. I bought a few pieces and one was a CFR Eco machine, I only bought it as it was a good price and also never used one before.
Well I've used it a few times now and what a great bit of kit. Heats the water super fast with its built in inline heater and the quality of the cleaning power is amazing. Using the wonder wand and the cfr hand tool it leaves the job nearly as dry as using a truckmount.
I can't believe I've overlooked this machine over the years and would seriously advise any one looking for a new machine or if upgrading to look at this bit of kit.

[john martin]

would it be that u just had crap portables before ...   like what if you had a portable with two or three times the suction of the cfr  , and you had a top inline heater ,  giving u scorching water from cold at upholstery tool rates ,  and them u used it with the cfr handtool and the wonderwand .   That would be even better .. wouldn't it ?

[Tony Stewart]

Hey Paul I have one of those. I bought it second hand and I think it's much overlooked. It has

Good heat on the inline heaters
Only needs two plugs that can be run off a double plug socket
Recirculates the water and filters it so you dont need to change the water as often as a normal machine
Cleans at 600psi and atomises the water
It has an 800 psi pump so you can overclock it if you really wanted by adjusting the nut on the inside of the pump regulator.

But it's still a portable but a good backup for flats etc.............truckmount it aint but I have the extended hoses so could say that I'm van mounted carpet cleaning- just need to get those 4 inch nails and my lump hammer and I'm there 

[Shaun_Ashmore]

John I think you are being a bit harsh, Paul has had umpteen portables the last one if I remember correctly was a Storm as well as owning a Truckmount. Personally I'd love to see the heat on it, when I had a wonder wand (quite some years ago) I couldn't get it to hold constant heat with my TM and also I didn't have the patience to get fully used to it.

[john martin]

John I think you are being a bit harsh, Paul has had umpteen portables the last one if I remember correctly was a Storm as well as owning a Truckmount. Personally I'd love to see the heat on it, when I had a wonder wand (quite some years ago) I couldn't get it to hold constant heat with my TM and also I didn't have the patience to get fully used to it.

Hopefully didnt come accross harsh ? i know paul knows his stuff . 
Il try and explain again  ...
cfr eco  ...  500psi pump  , single vac 6.6 , standard heatexchanger ( i mean its nothing special i use the same one form amtech )

So if you have say a storm for example , same or better pump , twice the 6.6 power , heater ( same or better )
then what makes the cfr any better ?
I know the cfr handtool is great , wouldnt be without it , and id the wonderwand is kinda a similar design then im sure thats great too ...
just nothing revolutionary about the machine spec

[Tony Stewart]

Hi John

I am not as technically expert in the figures so I bow to your knowledge.

When I look under my "bonnet" I can see two vacs, an inline heater, another heater underneath and it cleans at 600 psi so I may have the one up from this.
As for better - both of these recirculate the water and take less emptying and filling up, so that's better by far.
The jets are much finer and atomise the water and it is enclosed in the wand to spray and remove the soiling at the same time. It leaves the carpet quite dry.

[john martin]

sound like you have the older one  ...
you can check the spec of the newer one at the bottom of this page
http://www.amtechuk.co.uk/shop/CFR_ECO_500_Perfect_Heat_Carpet_Cleaning_Machine-pid-178.html

Its designed with american 120v thinking imo  ....       we'll just have the one spec for both areas , easy for us to make .

Its fine for close range extracting with the low flow atomised system ...  buts not high performance
you are not going to reach all the around a house from the door  ....    there are even some types upholstery i would like to clean with one vac .

[Mike Halliday]

I think there is a great deal of diminishing returns with portable &  truckmount machines.

If you have a single vac machine that dries a carpet in 2 hrs adding a second vac will not make the drying time 1 hr, then adding a 3rd van will not reduce it to 30minutes.

You can use the CFR. Machine with a single vac and the drying time will not be massively more than Duel vac machine. All this adding independent vac booster is not with the effort of setting them up to gain what is probably a 15-30 minute increase in drying times.

It would be interesting to see how it compares to using the additional effort to set up 2 airmovers.

It's like boy racers fitting Loud exhausts on their cars, flashy alloys or nodding dogs in the back window...... It might make them think they are increasing their performance but it's just about the eternal search for the magically fast drying time

[john martin]

You don't need power says the guy who uses a truckmount .
See my saddle oil thread  .... The cushions in that are an example of a type that would be wet for hours with a single vac. ...  OK i did use four motors on them but they are almost dry an hour later ....and they were black from kids spills etc.
Also convenience ....you can leave a powerful portable at a fixedpoint and reach upstairs ...what do u do with the CFR ... Whatever it is its slower work .
Power makes a difference to both speed and standard of cleaning as well as drying imo.   

[Mike Halliday]

I've took the TM out.... Now use a wet vac......just as good ( seriously)

[CleanerCarpets]

  well put Mike 

[Paul Moss]

Mike, don't your trucks just fall out on their own 😀

Shaun thanks for your kind words, I knew you still loved me 😍

Tony gllad things are going well for you, you have come a long way fast. Yep the truckmount is the way forward for making money. You have seen the light 😄😜

John, you know I can give as good as I get so no worries there.

All I would say guys is that over the years I've either owned, used or fiddled with every bit of kit out there and you get loads of info off people with hidden agenda's or companies who make machines. There are loads of cases and arguments for which is best machine, which has best air movement/flow,  hardy yardy yardy.
I make my choice on actually daily use, performance of the job in therms if it making money for you in the best possible way whether it be machines, chemicals, or process.
All I will say is if you are looking for a decent portable then include this in your list.

John Martin, have you ever used one?

[john martin]

Nah ,  im killing it these days with four 6.6 through 2" hose straight to a 2" swivel wand . 
I couldnt use a single vac  , i can simulate the performance by switching one vac on  ... i know its not very good .

[Paul Moss]

John why bother , when you have still about half the power of a truck but with much more messing around. If that's the road you want to go down then don't be a wanna be, just buy a truck buddy.

[john martin]

Ha , if there was a place close to me selling tms I would probably have succumbed by now ....but I have no sales or service here in Ireland .
But really !  I questioning do I need one ...I really have TM performance this time ....its violent dangerous suction ....would def kill a dog or a small child if I left the hose lying around .
And this year ...its cost me ....nothing !!!
 

[Logan Brown]

Truck mount is great! Welcome to the team. check is out: http://www.sanfordflcarpetcleaning.com/

[Ian Harper]

Paul Moss

Interesting most people are talking about the machine an spec but missing the big feature thats the time it saves not filling up. that means more productivity. time is the one thing we all have the same amount off so it use has to have the most value. this time saved can mean you can get more done in a day or pass on the benefit and provide a more competitive price. or even add more value to the customer with free stuff

[Glynn]

John,
You don't.

[john martin]

John,
You don't.

I would love to argue with you Glynn  , but i dont have a truckmount to compare and you dont have a series /parallel quad 6.6
so i guess its stalemate

Donald form steambrite should know his stuff ... dont you think ?

http://www.steam-bright.net/showthread.php?3642-Compare-Vaccum-performacne-Goliath-quad-6-6-portable-VS-20-hp-36-blower-truckmount

[Paul Moss]

Come on that's only a 36 blower.
If you put a 45 blower or bigger against it then it would suck it's balls out 😀