Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

brianbarber

  • Posts: 996
Grippatank hydro Heat
« on: November 30, 2015, 06:42:00 pm »
An imminent  upgrade to the two man hot water to go with my cold 650 litre grippatank system

Anybody who can give some feedback on reliability, actual heat received at the brush on a cold day like today with hose reel fully unwound,  and how it fares in everyday use, any breakdowns? would be greatly appreciated

Mr B
If in doubt.....Leave it out !!

dd

  • Posts: 2623
Re: Grippatank hydro Heat
« Reply #1 on: November 30, 2015, 08:19:53 pm »
I would get a demo first. I found the Pure Freedom Isothermal 1 diesel heater was not powerful enough to heat water enough to make a difference. The grippa system may be better but you may find the more powerful unit better.

NWH

  • Posts: 16952
Re: Grippatank hydro Heat
« Reply #2 on: November 30, 2015, 11:42:16 pm »
I have a Varitech heater it heats the water more than hot enough

dd

  • Posts: 2623
Re: Grippatank hydro Heat
« Reply #3 on: December 01, 2015, 06:50:14 am »
I have a Varitech heater it heats the water more than hot enough
Do you have the 9KW version?

NWH

  • Posts: 16952
Re: Grippatank hydro Heat
« Reply #4 on: December 01, 2015, 04:53:51 pm »
I have the second heater they made Kevin Red had the first,it's a single operator version mine puts out hot enough water that you wouldn't want to jump in a bath that hot lol around 55 degrees

concept

  • Posts: 1049
Re: Grippatank hydro Heat
« Reply #5 on: December 01, 2015, 04:58:59 pm »
We run 3 Grippatank hot systems, had the very first and helped develop it with them.

Great systems, and most importantly, great service.

We are too busy to have vans off the road, and the back up we receive from Grippatank is second to none, minimising down time and money lost, should anything ever go wrong, or we need a new system, or any parts.

We never go anywhere else because we don't want or need to.

NWH

  • Posts: 16952
Re: Grippatank hydro Heat
« Reply #6 on: December 01, 2015, 05:54:43 pm »
There is a trick with those heaters you can do to make the water hotter it is a simple fix that takes about 10 minutes and costs about a tenner if your not getting enough heat out of it.

concept

  • Posts: 1049
Re: Grippatank hydro Heat
« Reply #7 on: December 02, 2015, 01:48:09 pm »
There is a trick with those heaters you can do to make the water hotter it is a simple fix that takes about 10 minutes and costs about a tenner if your not getting enough heat out of it.

Would you care to share?

Spruce

  • Posts: 8645
Re: Grippatank hydro Heat
« Reply #8 on: December 02, 2015, 03:55:26 pm »
There is a trick with those heaters you can do to make the water hotter it is a simple fix that takes about 10 minutes and costs about a tenner if your not getting enough heat out of it.

Please
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

Spruce

  • Posts: 8645
Re: Grippatank hydro Heat
« Reply #9 on: December 12, 2015, 12:52:52 pm »
Bump
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

NWH

  • Posts: 16952
Re: Grippatank hydro Heat
« Reply #10 on: December 12, 2015, 07:25:49 pm »
Give me your number.

brianbarber

  • Posts: 996
Re: Grippatank hydro Heat
« Reply #11 on: February 28, 2016, 11:21:50 pm »
Thank you all for the usefull info


Mr B
If in doubt.....Leave it out !!

Spruce

  • Posts: 8645
Re: Grippatank hydro Heat
« Reply #12 on: February 29, 2016, 07:47:08 am »
The single operator diesel heaters were using 5kw diesel heaters (usually Webasto Thermo Top C) which didn't seem to keep up with heat demand.

The 9kw ST90 used on the 2 man operator units works a lot better. It also has a different heating cycle profile which works better in our wfp application.

Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

brianbarber

  • Posts: 996
Re: Grippatank hydro Heat
« Reply #13 on: February 29, 2016, 06:00:28 pm »
The single operator diesel heaters were using 5kw diesel heaters (usually Webasto Thermo Top C) which didn't seem to keep up with heat demand.

The 9kw ST90 used on the 2 man operator units works a lot better. It also has a different heating cycle profile which works better in our wfp application.

Thanks for that info, I was initially going with a single man hydro  to keep cost lower, but wanted both hot, and now that confirms that's the best choice

Mr B
If in doubt.....Leave it out !!