[trippyboy]

Lost a pin from one of my Aqua taps.
Where can I get a replacement?
cheers trippy

[Smudger]

You require a 4mm  diameter x 12mm long dowel pin either stainless steel or silver steel.

Plenty available on flea bay and a traditional hardware shop may have a selection. Some engineering companies may have them and people like Cromwell tools certainly will.

You'll be ok in the short term trippy, but buy a pack of 20+ for a couple of quid so you have spares

Darran

[trippyboy]

Nice one bud

[Ben Marriott]

You require a 4mm  diameter x 12mm long dowel pin either stainless steel or silver steel.

Plenty available on flea bay and a traditional hardware shop may have a selection. Some engineering companies may have them and people like Cromwell tools certainly will.

You'll be ok in the short term trippy, but buy a pack of 20+ for a couple of quid so you have spares

Darran

Is there anything you don't know? haha

[Smudger]

Yes - lots !!

But always interested in learning more

Darran

[Ben Marriott]

Can't fault you, not knowing things makes life interesting

[trippyboy]

http://www.ebay.co.uk/itm/4mm-m6-x-12mm-Dowel-Pins-A2-Stainless-Steel-Pack-of-50-/121709752596?pt=LH_DefaultDomain_3&hash=item1c56777114 wooooooooooo

[bobplum]

contact peter fogwill, he will send you a spare kit pack

[Smudger]

Perfect trippy.

Darran

[tlwcs]

Where can you buy the lube for the o ringss, mine are getting tight?
Tony

[Smudger]

Any DIY shop - silicone grease, comes in a tube or tub

Darran

[tlwcs]

Any DIY shop - silicone grease, comes in a tube or tub

Darran

Thanks

[paulben]

Engineering  suppliers or model engineering plies or if you know a engineer who could aquire a bit for you.  You just want some silver steel comes in 13 inch lengths if your really desperate get  drill bit the right size and cut the end that goes into drill chuck you will need a dremel tool or similar to cut it with or carefully with bench grinder