[simonr]

having a 400 upright tank strapped in but down the centre  of the van leaving space at both sides,   if not ive made a serious cock up

[Matt.]

 

So the tank is free standing in the middle of the van ??

It would have to be in a frame and bolted down

[capn sparkle]

It'll be fine until you slow down too fast - hit something solid - then the problems begin!

425kg (inc tank) flying 'through' you.

[Matt.]

It'll be fine until you slow down too fast - hit something solid - then the problems begin!

425kg (inc tank) flying 'through' you.

Exactly,

So tank is long ways down the middle of the van, sorry for laughing, but it sounds like it's an upright tank ?? 

If so you going to have to change it, it will have to be against bulk head, to strap it, or have a flat tank and board it in

[johnny bravo]

STRAP it against the wooden or steel bulkhead on 4 anchor points., defeats gravity.   dangerous the way you have it.
a flat tank would be safer in the middle.

[Rich Wilts]

Fix roller blade wheels to it and drag It behind the van. It'll be safer.

[Matt.]

Fix roller blade wheels to it and drag It behind the van. It'll be safer.

[simonr]

ive just bought it & it fits against the bulkhead fine, but not with the outlet taps i need, with them fitted its too big,  the only way it fits in is down the middle.  i said i didnt think that was legal but i was ordered on here to ask anyway, so probs be in the for sale bit soon

[kempy]

Pure freedom do a lay flat 350 litre tank , much better

[richard groves]

What van do you have ? only asking as I have a 400 L upright tank against bulkhead in a peugeot expert  ratchet strapped with no issues.
If the only reason it won't fit is because of  a tap, think outside the box, there must be a way around the problem.

[Matt.]

Is the van ply lined on the sides if so there is about 4-6" so you will have to cut a section out and slide tank over a bit more.

I bought a bigger tank and wanted a shelf on the far side to put Merlin on, ended up 2" to big so went to see me mate in dealership body shop and he cut the wood out and cut a small piece of body work out and welded another piece in for me, tank fits and Merlin fits nice and tight in the side, I just got to sort john guest fitting out now.

 

[PoleKing]

It's not 'illegal' but not safe either.

[outdoor restore]

ive just bought it & it fits against the bulkhead fine, but not with the outlet taps i need, with them fitted its too big,  the only way it fits in is down the middle.  i said i didnt think that was legal but i was ordered on here to ask anyway, so probs be in the for sale bit soon

A few years ago I fitted another outlet to a 500L tank, simply by drilling hole and using a metal outlet fitting to cut the thread in the plastic, fitted washer and never had a leak from it.

[CleanClear]

having a 400 upright tank strapped in but down the centre  of the van leaving space at both sides,   if not ive made a serious cock up

If i've read your other post correct and you have it against the bulkhead then yes its safe. The question of is it legal ?.... Will be answered by telling us if it is securley strapped down to the floor. If it is, and its also against your bulkhead and secured to that then most probably the answer is................yes its legal.  Your main question needs to be.......can the tank move ? If it can you need to cure it with restraint (strap/bar etc.).

[johnny bravo]

a 400 upright shouldnt be too wide,  just change your tap to one with a bend on it,    similar to the one from purefreedom, large at £28,  should make life easier,     get some flexi hose off wintecs by the metre,  very bendy.    just get a lot, take it around the back of the tank if easier to connect up to the pump.
where you from

[johnny bravo]

kendal cake country

[johnny bravo]

just ask for someone up near you to take a look for you,  many eyes make quicker ideas,     confuchisas says

[simonr]

thanks for the replies, its  a 400 upright. i have a berilgo 75 hdi with a 350 upright in at the moment but i wanted to put a hose reel in at the rear door & have the set up tim gq made, so i measured the tank up & it fits just but i forgot about taps cos the one i use for backpacks is quite bulky & i need that keeping

i never thought about cutting out the ply lining i will try that

Is the van ply lined on the sides if so there is about 4-6" so you will have to cut a section out and slide tank over a bit more.

I bought a bigger tank and wanted a shelf on the far side to put Merlin on, ended up 2" to big so went to see me mate in dealership body shop and he cut the wood out and cut a small piece of body work out and welded another piece in for me, tank fits and Merlin fits nice and tight in the side, I just got to sort john guest fitting out now.

 

[johnny bravo]

look on my posts,   setup for a 2 man system    theres a link for a tap of purefreedom, £19 its got a bend on so your hose to pump fits down the side of the tank , then connect to your pump

waterfitting for 2 reels, this tap should be better

[Matt.]

thanks for the replies, its  a 400 upright. i have a berilgo 75 hdi with a 350 upright in at the moment but i wanted to put a hose reel in at the rear door & have the set up tim gq made, so i measured the tank up & it fits just but i forgot about taps cos the one i use for backpacks is quite bulky & i need that keeping

i never thought about cutting out the ply lining i will try that

Is the van ply lined on the sides if so there is about 4-6" so you will have to cut a section out and slide tank over a bit more.

I bought a bigger tank and wanted a shelf on the far side to put Merlin on, ended up 2" to big so went to see me mate in dealership body shop and he cut the wood out and cut a small piece of body work out and welded another piece in for me, tank fits and Merlin fits nice and tight in the side, I just got to sort john guest fitting out now.

 

I will send pic if u want mate, I gained a good 6"