[Matt.]

Just arrived to clean windows and have been asked to remove this other sticker and glue left behind from other one that someone has had a go at !

Where the ladder is there's lots of glue, tried the famous virosol and some crap out of there work shop

Any help appreciated

[ChumBucket]

If it's glass a scraper with brand new blade will do it. If it's on the fascia above the ladder (plastic?) try furniture polish & a cloth. Try to get the proper Mr. Sheen/Mr. Muscle polish in aerosol form.

[Matt.]

I wish it was on the glass ! At the top of pic on the cladding

[Bungle]

Just arrived to clean windows and have been asked to remove this other sticker and glue left behind from other one that someone has had a go at !

Where the ladder is there's lots of glue, tried the famous virosol and some crap out of there work shop

Any help appreciated

uPVC solvent cleaner.

[Matt.]

Maybe, will go round b&q now

[Mike #1]

Go to Halfords get some tar remover that will do the trick

[KLEENAWAY]

Try petrol on a rag matty, i tried all sorts to get the glue off my van....that was the best and the cheapest by far!

Danny

[Matt.]

I tried some kind of stripper out of there body repair shop but done nothing, I only found out about half 5 they just asks will I have it done by morning. They have directors coming,

Funny people

[chris scott]

Petrol or Thinners and a pan scrub (foam). Test a small are first

[Andrew Griffiths]

Have you tried sticky stuff remover available B+Q cleaning section or lakeland that usual gets most glue off after labels have been remover. £4 for 250ml
Soak the glued area allow short time to dwell then wipe off

[paulben]

Found CIF original gets most stuff off wet it first

[Clever Forum Name]

Unger pad system and

http://www.diy.com/departments/desolvit-sticky-stuff-remover-250ml/254704_BQ.prd

[chris turner]

This stuff
http://www.cloverchem.co.uk/uk/products/spauto_tar_glue_uk.htm

I do lots of builder's cleans, this stuff works wonders. I get it in a local cleaning supply store for much cheaper though.

[Gerald Ash]

Bare in mind adhesives react to heat and cold. tickers can be warmed up with small heat gun or blow torch, carefully. The stickers should then be able to peel off leaving little if any adhesive behind.
     You can buy freezing sprays. Spray on the glue to freeze then carefully use scraper with new blade. You will feel the blade hit the edge of the glue and keep a very shallow angle on the blade. May sound mad but I`ve done it this way before on pvc frames when nothing else I had worked.
  Worked with adhesives most of my life shoe repair and making.

[Matt.]

Done the job this afternoon using clover chemicals tar & glue remover.

Sprayed it up a few times and a load of elbow grease. Job done

Thanks guys

[gordonswindows]

Label Glue remover from JSK #wonderstuff