[Blackadder]

I started getting a few brush smears with my old super lite brush, so I put my brand new one on and now it's even worse? Not sure why it's happening? It's drying clear but it's taking a lot more time rinsing off, anyone had this before or know what might be causing it?

Mark

[Smudger]

Flow too low ?

Have you checked that your water is not contaminated ?

Darran

[Mike #1]

Could be unicorn sperm 😷😷

[Blackadder]

Flow too low ?

Have you checked that your water is not contaminated ?

Darran

I don't think it's a contamination problem, water still at 0.01 and it's happened on last few tanks, will try a higher flow to see if this sorts the issue. Cheers Darran.

[slap bash]

Your brush is not splaying properly.Try a little more pressure on the pole to the brush and more water.

[CleanClear]

I started getting a few brush smears with my old super lite brush, ............<snip> It's drying clear but it's taking a lot more time rinsing off,

Maybe its just me but this makes no sense. Can you elaborate more ? How do you know you're getting smears, and whats the issue if its drying fine ? I'm just confused from reading it.

[Blackadder]

This is what I was referring to.

[Positivity]

I see that all the time it still dries ok doesn't it? Flow looks a little low to me.

[Blackadder]

Seems to, I'm glad that this is common place, been WFP for 6 months and last couple of weeks is the first time I've seen it.

[Dave Willis]

New brushes do that sometimes. Could try giving it a clean with degreaser but if it's drying ok don't worry.

[SeanK]

That's just the mark of the brush scrubbing the glass it just shows up on some types of glass more than others
nothing to worry about.